Fire & CO Alarms
Carbon monoxide detectors in fire detection and fire alarm systems
Matt Parton, product development manager with leading fire and security solutions supplier, ESP, provides wholesalers with detailed information on the use of CO detectors and where they may be best utilised in fire alarm systems.
O
ne type of detector used in fire detection and fire alarm systems is the carbon monoxide (CO) detector. As all smoke contains elements of incomplete combustion, carbon monoxide will always be present in a fire. This article considers the use of CO detectors and where they may be best utilised.
Fire detection and fire alarm systems utilise a range of detectors to accommodate a variety of fires. However, it is important that the means of detection is suitable for the nature of the fire and that any detector conforms to the appropriate Standard.
Means of operation of a CO detector There are multiple ways in which carbon monoxide can be detected. The most common method is for electrodes to be immersed in a chemical solution that senses change in current flow when CO is present in dangerous quantities. A second method involves metal-oxide semiconductor (MOS) sensors whose resistance changes depending on the quantity of CO within the chamber. With such detection a signal is generated and either a sounder operates or the control and indicating equipment (CIE) is triggered to sound an alarm.
A third method of CO detection uses a biomimetic sensor. The sensor contains a gel which changes colour when it absorbs CO. As the colour changes, an alarm is triggered.
Permitted use in fire detection and fire alarm systems
The commentary detailed in Clause 10.1.4 of BS 5839-6 shows that carbon monoxide fire detectors are point-type detectors which respond to the carbon monoxide present during incomplete combustion. Such detectors are not equivalent to smoke detectors in their response to fire. One caveat to the use of CO detectors within fire detection and fire alarm systems is that those conforming to BS EN 50291 should not be used
28 | electrical wholesalerAugust 2025
“It is important that the means of fire detection is suitable for the nature of the fire and that any detector conforms to the appropriate Standard.”
in such systems. CO detectors conforming to BS EN 50291 are only to be used for detecting the presence of CO potentially found in gas boilers, fires or solid fuel systems. However, this does not preclude them being interconnected with the fire detection and fire alarm system in a dwelling. CO detectors conforming to BS EN 54-26 are permitted for use in Grade A systems conforming to BS 5839-6 and to fire detection and fire alarm systems conforming to BS 5839-1. It is often the case that CO detectors are incorporated within multi-sensor heat detectors conforming to BS ISO 7240-8 or BS EN 54-30 or multisensory smoke and heat detectors conforming to BS EN 54-31.
The benefits associated with CO detectors are that they react more rapidly to fire than heat detectors and are immune to certain environmental factors which may affect smoke detectors, such as dust, steam and cigarette smoke.
Maintenance is a key factor where CO detectors are used. As the most common types utilise a chemical means of detection, it is important that the sensor or detector is changed every 7 years.
Installation of CO detectors
In domestic premises, CO detectors/alarms should not be the sole means of fire detection in Grade D1/D2 fire detection and fire alarm systems. Clause 10.2e) of BS 5839-6 recommends that CO detectors, and multisensory detectors containing CO detection, are only used for Grade A systems where an annual maintenance regime exists, or where a fault warning is given to indicate the need to replace the electrochemical cell. Where CO detectors are used within a
ewnews.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
