Advertorials
Sri Lankan expansion for ETAL ETAL Group, a world leader in magnetic components for power and signal
Encapsulated AC-DC converters provide
up to 36W and protect to IP67 Powersolve Electronics Ltd, specialists in power supplies for the widest range of applications for over 30 years, announces three new series of plastic encapsulated AC-DC converters that offer protection to IP67. These are therefore suitable for use where the ingress of moisture, oil and dust need to be avoided. The PS12MK (10-12 Watts), PS20MK (15-20 Watts) and PS36MK (25-36 Watts) are
ACDC switch mode power supplies that operate from a wide universal input range of 90 to 264VAC, 50/60Hz. Output voltages of 5V, 9V, 12V, 15V and 24V DC are available for each model range or in fact any voltage between 5V and 24V could be supplied if quantities make it viable.
The power supplies are housed in robust plastic encapsulated enclosures rated to
IP67 and they can be either chassis or wall mounted. Input and outputs are via 500mm flying leads as standard. However these can be other lengths and terminated with any connector required to suit the customers’ specific application if required. All models feature over voltage, over current and short circuit protection. Operating temperature range is -10 to +40 degrees C and humidity 10 to 90% RH non-condensing. Standby power consumption is ≤0.3 Watts max with no output load connected.
Input is Class II safety with 3000VAC input to output isolation. All models meet all relevant EMC requirements and TUV safety approvals.
These products are very compact with the PS12MK unit measuring only 56 x 39 x
26mm, the PS20MK 64 x 47 x 28mm and the PS36MK unit 133 x 50 x 34mm. The PS MK Series are ideal for a variety of applications such as LED lighting, CCTV cameras or any other low power electronic equipment requiring a power supply for harsh environments. Pricing is very competitive and full details of these and similar products can be found on our website:
www.powersolve.co.uk
Rear panel “RKL” with fastening for mounting rail For quick and easy installation of a case on a DIN rail according to DIN EN 60715 TH 35,
the so-called top hat rail, company Fischer Elektronik has developed a back panel with integrated top hat rail fastening. With the new RKL ... rear panel there is a possibility to attach different case designs from Fischer Elektronik to a top hat rail now. The robust rear panel, consisting of an extruded aluminum profile, has a specially developed contour, which is suitable for the different thicknesses of the DIN rail according to DIN EN 60715 TH 35 (1 mm to 2.3 mm). The snap-in of the case onto the top-hat rail is made possible by the pressed-in stainless steel wire spring and thus guarantees a secure and tight fit. The position of the clip on the RKL ... was chosen so that the case is positioned in the center of the top-hat rail. The case back panel RKL ... is offered in the standard portfolio for 22 different cases. It is milled to the respective case contour and size and replaces the case cover panel on the back. The customer can choose between three different surfaces: natural color anodized (ME), black anodized (SA) or electrically conductive transparent passivated (TP). Other sizes, surface treatments or additional mechanical processing are realized according to customer specifications. Please contact us, for further information and inquiries the product experts of Fischer Elektronik GmbH & Co. KG are pleased to be at your disposal, also at www.
fischerelektronik.de.
Our service enables you to download the photoprint version (300 dpi).
www.fischerelektronik.de
38 June 2020 Components in Electronics
www.cieonline.co.uk
applications, today announced the relocation and expansion of its Sri Lankan manufacturing facility, thanks to the increased demand and growth that the company has experienced. The new site in Piliyandala commenced operations in the first quarter of 2020, following transfer of production from its Rathmalana facility. The purpose designed and fully air-conditioned factory provides room for further expansion, with no disruption to customer service, and offers them a valuable alternative source for volume production of magnetic components outside of China. As with all ETAL Group manufacturing facilities, following the relocation, ETAL Group Pvt Ltd remains fully certified to ISO 9001, 14001 and 45001. +44 (0)1444 871186
www.etalgroup.com
Omron appoints Easby to support MEMS sensor
portfolio Omron Electronic Components Europe today announced that it has expanded its UK distribution network with the appointment of Easby Electronics. Easby will focus especially on Omron’s innovative sensor solutions in support of its strategy to develop a portfolio of IoT building blocks.
image001.jpgEasby will stock and support the full range of Omron sensor technologies and electromechanical components, but will focus particularly on working with its IoT customers to identify opportunities for Omron MEMS based sensor solutions for building automation, industrial automation and other environmental monitoring applications. These complement the TELIT high-performance IoT modules and Raystar displays both available from Easby. Omron offers technologies to monitor the environment itself, measuring temperature, humidity and other characteristics, as well as care for the people within that environment, ensuring that services such as heating and lighting are turned on when they are present, that the air quality is high and that spaces are not becoming overcrowded. Omron’s flagship Human Vision Component allows individuals to be recognised, providing a touchless access control solution. The new relationship also brings Easby a top class range of MOSFET relays, a technology that it currently does not have in its portfolio. 31 235 681 296 /
http://components.omron.eu/
How a Zero Flux Current Transducer Works: new video
from Danisense Danisense, the leader in high-accuracy current transducers for demanding applications, has produced a new tutorial video which discusses how – using the zero flux principle - current transducers can be produced with a measurement accuracy as accurate as 1ppm for applications such as power analysers in EV production, medical equipment such as MRI scanners and power supplies for particle accelerators. The video explains zero flux technology,
also called ‘fluxgate’ and how it works, including the use of a closed loop which balances opposing magnetic fields, so eliminating offset and linearity issues. Using this combination of techniques, it is possible to achieve extremely accurate results even in a harsh environment. Comments Loic Moreau, Sales & Marketing Director, Danisense A/S: “The test and measurement industry has had to be extremely creative to cope with the increasing challenges set by customers who require greater accuracy in tough conditions. Current sense transducers from Danisense are acknowledged to be amongst the most reliable and high performance in the industry. We hope this video will help customers understand the technologies we use so that they can benefit from the results.” Tel: +41 78 704 29 67 / E-mail:
lmo@danisense.com Website :
www.danisense.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
