Optoelectronics Keeping
There are ever increasing demands from the consumer to make things smaller and more convenient. As a result, electronic devices are becoming smaller with more densely populated printed circuit board (PCBs) assemblies. While this is largely positive in terms of technological advancement and usability, it does create some practical complications, especially when considering the PCB cleaning process
P
electronics clean with KlensTek and Koki
electronics cleaning process costs. Rigorously tested on the most widely used solder paste and fl ux chemistries, SMT is proven to achieve excellent, residue-free cleaning results with PCB assemblies, including those with densely placed, low-standoff components.
One-stop shop
articular issues include lower component stand-off making access to the fl ux residues more diffi cult, rinsing of the remaining residues and chemistry, and the typical use of ‘no-clean’ soldering materials which are not designed to be removed in the fi rst place. Trapped cleaning chemicals and partially dissolved fl ux residues can lead to assembly defects. High refl ow temperatures and overheating can also cause hard-to-remove oxidised residue, and the overall variety of contaminants can make cleaning more complex.
In many cases, traditional cleaning methods are not suffi cient to achieve the expected standard of cleanliness, so it is critical that considerations are made to accommodate new PCB structures and designs and most importantly consideration is given to the compatibility of the contaminant and what you use to remove it.
Next generation cleaning products The latest generation PCB cleaners that break down tough soils without leaving residue are the most effi cient choice to target tighter spaces. Superior cleaning also ensures stronger, more active fl uxes can be used, resulting in better solder joints and a wider process window for manufacturing. The latest range of cleaning products are rising to the challenge
24 June 2020
and changing the game – delivering processes that offer better cleaning, consistency, speed and value.
KlensTek cleaning products, developed by Fraser Technologies, deliver superior, environmentally friendly electronics cleaning solutions for a wide range of requirements and applications. These chemistries offer outstanding cleaning power that is gentle on components; non-fl ammable in ambient air temperatures and pressure conditions; and are environmentally friendly.
The KlensTek Cleaner and Flux Remover aerosol features an attachable brush and ergonomic can design for effective, economic use and is compatible with a broad range of metals, plastics and elastomers. It is versatile enough to work with almost any defl uxing application, including lead-free fl uxes. It has a safe exposure limit of 201 ppm, which is comparable to everyday rubbing alcohol, and is a safe alternative to fl ammable materials such as IPA and fl ammable aerosols, some of which are being phased out for health and environmental reasons.
The KlensTek SMT cleaner/defl uxer is a highly effective, multi-use aqueous cleaning detergent formulated to meet today’s exacting standards for both PCB and stencil cleaning. Dilutable to concentrations as low as 10 per cent, SMT can help signifi cantly reduce
Components in Electronics
www.cieonline.co.uk
Fraser Technologies also offer and recommend the Koki soldering range of products, which complement the KlensTek cleaning chemistry range to offer a one-stop shop for all electronics component needs. Koki is globally well known for manufacturing exceptionally high quality, reliable products and has over 50 years of experience behind them. Koki lead the fi eld with innovative products to keep up with the rapid changes in technology.
Koki offer the full range of PCB assembly materials, leaded and unleaded solder pastes, solder wires, liquid fl uxes for both wave and selective soldering, tack fl uxes for repair and rework and SMT adhesives.
Once the PCB is assembled, the KlensTek cleaning range can then be used to remove the fl ux residues and contamination before going
on to the next step in the assembly process, coating, potting and box-build. Fraser Technologies has been supplying electronics cleaning solutions for over 50 years and is a trusted partner. The company has achieved such expertise in the field, it developed its own chemistries in order to provide the best possible outcomes for customers. With an extensive range of products, Fraser Technologies work with their customers to identify the best solution for nearly every cleaning application imaginable.
frasertech.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
