ADVERTORIAL TECHNOLOGY IN ACTION


maintain or calibrate analytical sensors can impact on efficiency and production costs, and can lead to reduced product quality and unplanned downtime. Cutting- edge process analytical systems with built-in maintenance diagnostics increase process integrity and reduce downtime by predicting their own maintenance and reducing instrument lifecycle costs. METTLER TOLEDO's Intelligent Sensor Management (ISM) simplifies sensor management


New benchmark in thermal flow measurement


T


he new benchmark in thermal flow measurement is the SA from ifm electronic. Quite simply the best and


easiest to use, the SA is optimised for a range of media including water, oils, glycol and air. Not only will the SA measure the flow rate, but the device will also measure the temperature of the medium. The SA series are equipped with the latest sensing technologies for optimum setting and usage, as well as featuring a very flexible design concept to reduce inventory. The SA features a highly visible four-digit display, which


the user can configure to show the flow rate or temperature and to alternate from red to green as required. Unlike most flowmeters, using an SA does not mean


specifying exactly the pipe diameter to find the correct device. The SA consists of a display and evaluation section that sits on the pipe and a probe inserted through the pipe wall into the medium.


IFM u 020 8213 0000 u www.ifm.com/uk


Bronkhorst UK


Improve Analytical Process Reliablity With Intelligent Sensors I


n sugar, starch, and sweetener industries, maintaining product quality and process safety and control is a constant challenge. Failure to properly


and improves maintenance, which translates into increased process reliability and reduced operating costs. ISM’s real-time diagnostics monitor themselves based process conditions, advising operators when maintenance is required. Sensors with a short remaining lifetime can be replaced pre-emptively before they fail, resulting in higher process integrity and fewer fluctuations in product quality. ISM sensors also offer Plug and Measure functionality, meaning they can be installed and be ready to measure in under a minute.


METTLER TOLEDO u 0116 234 5095 u enquire.mtuk@mt.com u www.mt.com


Automation of dome loaded back pressure controllers D


ome loaded back pressure controllers are often used in processes where constant pressure is needed in a (chemical)


reactor. Electronic pressure controllers are very effective when it comes to automating such processes. The process pressure is set by applying the required pressure


to the reference side of the controller at a one-to-one ratio. The reference pressure can be applied using a manual reduction device, or for process automation, you can use electronic pressure controllers.’ The Bronkhorst Process Pressure Controller (PPC) doesn’t just


reduce gas consumption, it also offers excellent stability. ‘The process side of the dome loaded pressure controller is


often used to process aggressive reactants and by-products at high temperatures. The multiple-orifice design is capable of controlling gases and liquids as well as multi-phase flows.’


u 01223 833 222


Eurotherm by Schneider Electric launch latest cybersecurity certified programmable controllers to improve process yield


• Simplify precision PID control in process automation systems


• Aid repeatability and yield improvement • Ethernet connectivity to PLC, IIoT and Industry 4.0 infrastructure


• Achilles® CRT Level 1 certification helps ease cybersecurity concerns


Eurotherm™ launches a new range of DIN rail


mounting Programmable Controllers, placing precision at the heart of a process.


Efficient, consistent results in an easy-to-deploy format EPC2000 Programmable Controllers are easy to install, commission and replace. Enhanced Eurotherm control performance and exceptional measurement thermal stability aids repeatability and yield. Designed especially for high reliability in demanding environments, the controller helps reduce unplanned downtime.


Distributed, communicating control with world class certification Compact EPC2000 devices can be distributed close to the point of use reducing cabling runs and wiring costs. Ethernet connectivity enhances the convergence of information and operations technology, giving plant managers access to data needed to make informed decisions.. Certification to international standards allows the EPC2000 range to be applied to a wide spectrum of markets and applications. Cameron Large, Global OEM Business Development Manager at Eurotherm comments that “The EPC2000


28 SEPTEMBER 2018 | PROCESS & CONTROL


DIN rail controller enables an OEM to easily integrate high precision control and setpoint programming into a PLC system by using native Ethernet communication. It’s a very versatile, cost-effective control solution with high stability, measurement and control.”


Lower operational costs and built in data security A robust battery-free design helps reduce equipment and maintenance costs. The EPC2000 controller is certified to the highly demanding Achilles® CRT Level 1 qualification which continues our focus on products designed around best practices for cybersecurity.


For more information about Eurotherm EPC2000 programmable controllers, please visit our website.


Eurotherm u 01903 268 500 u www.eurotherm.com


Eclipse Magnetics Exhibiting Magnetic Separation & Detection Systems at


Biggest Ever PPMA Show E


clipse Magnetics will be attending the Process and Packaging Machinery Association Show 2018 from 25th


– 27th September at the NEC in Birmingham. On display will be a selection of products from our comprehensive range of high performance magnetic separation and detection systems at stand E54. Set to be the biggest PPMA Show yet, the exhibition is


the perfect platform in which to showcase Eclipse Magnetics’ range of contamination detection and removal systems, suitable for use at all HACCP stages of powder, granule, liquid, and paste production. As a company at the very forefront of magnet design and innovation, the range also includes separation systems for extracting primary tramp metals such as nuts, bolts, screws and secondary ferrous contamination such as fine particles from equipment wear in process.


Eclipse Magnetics Ltd u 0114 225 0600 u info@eclipsemagnetics.com


CONNECTINGINDUSTRY.COM/PROCESS&CONTROL u www.bronkhorst.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54