PRODUCTS RACKS, CABINETS & ENCLOSURES PRE-CAST CONCRETE INSTALLATION SIMPLIFIED
using high-strength magnets. Designed specifically for pre-cast concrete installation, IBT enclosures retain their position after concrete pour and cure, aided through their support beam design. A patented diaphragm system seals against ingress of concrete and reinforces the
T
he installation of pre-cast concrete construction projects
has been made faster and simpler thanks to increased use of a range of electrical connection enclosures. The enclosures are designed for use in a wide range of building types and are flexible for various mounting options. Spelsberg’s IBT System
enclosures fit securely to formwork
enclosure by expanding following insertion and routing of conduit, with no further on-site sealing required. All products within the IBT range are halogen-free and offer high temperature resistance, which means they meet DIN, BS and NEMA standards. Following the assurance of
protection that the IBT System provides, the primary advantage is
the simplicity and speed of installation. When formwork is removed, the face of the enclosure is revealed and ready to be opened, ready for easy access to enable a rapid first fix of electrics. Multiple enclosures can also be easily connected into a grid via the support beam. The IBT System is appropriate for
a wide range of building types and a variety of housings are available, including classic universal, transition and junction boxes, coming in a range of sizes. The IBTronic System meanwhile is used to enclose electronic components, from LED luminaires to alarm speakers.
www.spelsberg.co.uk
ELSA’S STANDARD COMPONENTS FOR MACHINE ENCLOSURES AND GUARDS
NEW FAST-ASSEMBLY UNICASE INSTRUMENT ENCLOSURES
New improved Unicase aluminium instrument enclosures from Metcase are now even quicker to assemble – thanks to redesigned chassis profiles and a new assembly tool (available as an accessory). These enclosures suit a wide range of applications including
measuring and control, feedback control, peripheral devices and interfaces, switchboxes, modems, medical and laboratory technology. The new extruded chassis profiles hold the blue slide-in
threaded nut holders in perfect vertical alignment – making it easier to locate top and base cover screws.
The new assembly tool pushes the blue threaded nut holders
into exactly the right horizontal position in the profiles. This aligns them perfectly with the top and base cover assembly screws every time. There are four screws on each side so the improvements speed up assembly times considerably. The new assembly tool (Part No. M5500001) is ergonomically contoured so it is comfortable to hold. It is 3D printed from white PA 2200 (polyamide).
www.metcase.co.uk
Elesa’s CFSW hinge features an inbuilt multiple switch which automatically cuts the power supply to protect the operator. This IP67 double insulated hinge can be subjected to frequent cleaning cycles and can be used in any situation or environment where special attention to cleaning and hygiene is required, such as in food processing or pharmaceutical production. Its small size, with various assembly and output options, make this product easy to install on the most common aluminium profiles of 30mm minimum width. Complimentary to the CFSW hinge
Elesa offer its BMS series snap door lock coupled with GN 676.5 stainless steel hand knobs to complete the door arrangement. Rugged glass reinforced technopolymer BMS snap locks provide a convenient snap-close/snap-open function or snap-closed/lift-to-open, as well as snap-closed/release-with- key for greater door security. GN 676.5 hand knobs match the
stainless or aluminium aesthetic, having a high-quality matt finish edged with plain or knurled rims to ensure a positive grip for opening/ closing of enclosure doors.
www.elesa.com
HAMMOND IP66 STAINLESS STEEL INDUSTRIAL ENCLOSURES WITH SMOOTH FINISH
The IP66 EJSS family from Hammond Electronics is available in 304 or 316 grade stainless steel, supplied as standard in a natural smooth brushed finish. Sealed to IP66, the EJSS is designed for use as an instrument enclosure, an electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. In applications such as food processing, a formed lip on the enclosure diverts flowing liquids and contaminants away from the seamless poured-in place gasket in the door, enabling it to be hosed down during cleaning. Stainless steel is also an excellent material for installation in areas where corrosion may be a problem. The EJSS family is available in 22 sizes, ranging from 102 x 102 x 76mm to 406 x 356 x 254mm. All but the two smallest sizes are supplied complete with a 1.6mm thick internal unpainted galvanised steel panel. The EJSS meets IEC 60529 IP66 for European and CE, UL and NEMA 3R, 4, 4X, 12, and 13 requirements for North American markets. The body and cover are formed from 1.3mm stainless steel with smooth, continuously
welded seams without knock outs, cut outs, or holes. Integral heavy duty full width top and bottom brackets facilitate mounting the enclosure to an external surface. The cover,
mounted on a heavy duty continuous hinge, opens through 180° for good access; a quarter turn latch prevents casual unauthorised access by requiring a tool for operation. A bonding stud is provided on the door and a grounding stud is fitted to the enclosure.
www.hammondmfg.com
30 SEPTEMBER 2020 | ELECTRONICS / ELECTRONICS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
