SENSORS
Digitisation of Agriculture & the Underlying Technology Mandated
By Juli Ban, Product Manager (Function Devices), Murata W
idely publicised in the media, there are rising concerns both within the agricultural industry and from government policymakers as to whether food production can keep up with unprecedented future demands. The ever-expanding population (especially in developing countries), combined with limited suitable land reserves and workforce issues, plus numerous different environmental factors, means that there is a serious risk of food supply shortages becoming increasingly commonplace. It is now widely acknowledged that technology will need to play a pivotal role in next-generation agricultural activities, helping methods and any remaining reliance on manual work. Such technology will enable the crop yields per hectare of land to be essential resources, while also keeping labour costs down.
Boosting worldwide food production extrapolated that the global population will grow from its current total of 7.9 billion to over 10 billion within the next 35 years. Consequently, there will be at least another 2 billion people to feed on top of what we have today (and attending the current population is already proving to be challenging enough). Combating climate change and protecting biodiversity means that making more land available through deforestation is simply not acceptable. Ways must therefore be found to make better use of existing farmland. Critical to the adoption of smart agricultural practices will be the acquisition and subsequent analysis of data. Sensor devices will be deployed across farming sites, in order to provide continuous updates on key parameters affecting food production (such as air temperature, humidity, degrees of illumination, etc.). This will mean that farmers are able to gain the information they need to respond to changing circumstances -
18 APRIL 2023 | ELECTRONICS TODAY
growing conditions or the uncovering of trends which will need a longer-term solution. Irrigation and fertiliser use both represent major operational expenses for farmers. Likewise, powering the lighting needed for vertical farms and indoor horticultural sites will Making certain that these aspects are being optimally utilised is thus paramount - and that is why advanced sensor implementation is going to be needed.
Fundamental sensor attributes The sensors used in an agricultural context need to have certain characteristics if they are to be effective in their assigned function. Firstly, they must be robust enough to cope with the application environment in which they are situated (so that continued operation can be relied upon). Secondly, they need to deliver accurate data - otherwise the decisions made by farmers based on this data may be incorrect, with crop production volumes or crop quality suffering as a result. Finally, these sensors have to be accompanied by appropriate connectivity.
Soil measurements
One of the many different areas of agriculture where having constantly updated parametric data will be of real value is in relation to soil. This will allow farmers to gauge what amount of nutrients and salt ions are present, and gain insight as to whether they are using the right quantities of fertiliser, or if the irrigation system in place is working satisfactorily, as well as looking for signs of groundwater pollution. The distribution of soil sensors will depend on the nature of the crop being grown, and how closely parameters need to be monitored. For higher value crops (such as the grapes used in winemaking), greater sensor density be acquired will also be crop dependent, as well as the actual methods being used. For outdoor farming operations, updates every 30mins are likely to be adequate, but for
indoor set-ups this might go down to as often as every 5mins.
As shown in Figure 1, soil samples will basically consist of the soil mineral itself (in the form of grains), air gaps and pore water. The nutrients within the soil, along with the fertiliser chemicals, will be carried in the pore water. In-depth studying of soil conditions will require electrical conductivity (EC) measurements to be conducted. These will give data on the composition of the soil based on the resistance properties of each of its constituent parts.
Figure 1: Schematic describing soil composition
One of the problems with existing soil sensor devices is that their accuracy can variations and excessive water content, as well as the presence of chemical compounds. Another problem that needs to be factored in is that rocks between the sensor’s electrodes can interfere with the results obtained. For this reason, a multi-electrode arrangement will prove to be much more accurate. The need to address these issues was what motivated Murata engineers to develop a new, more sophisticated soil sensor solution.
Through Murata’s soil sensor, it is possible for soil conditions to be continuously monitored. This highly-integrated device has three different sensing functions built into it,
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
