DS-FEB22-PG36_Layout 1 15/02/2022 11:14 Page 1
FEATURE
3D PRINTING/ADDITIVE MANUFACTURING
Accumold has invested in the Nano Dimension Fabrica 2.0 micro-AM technology. Aaron Johnson, VP of marketing and customer strategy, looks into why the company is truly excited about what micro-AM has to offer
ADDITIVE MANUFACTURING FOR MICRO MANUFACTURING
E
ven two years ago, if the discussion had been whether additive manufacturing (AM) was disrupting the way that
micro and precision plastics parts were being produced, there would have been a resounding chorus of ‘no’. For sure, for over 25 years, AM has been disrupting traditional ‘macro’ scale manufacturing, initially producing rapid prototypes, and more recently competing as an alternative production technology. But the attainable and repeatable micron level resolution required when looking for a technology that could compete with/complement micro moulding was not possible through the use of AM, and so the micro manufacturing sector was unable to benefit from the inherent process advantages that existed through the use of industrial 3D printing. That was until recently. Because
now, after much pain-staking R&D, commercially viable micro-AM technologies do exist that are able to repeatably achieve micron tolerances. For a micro moulding company such as Accumold, these technologies broaden the services that can be offered for clients constantly requiring the production of innovative and cutting-edge micro plastic parts and components in anything from prototype to mass production volumes.
FABRICA 2.0 Accumold has invested in the Nano Dimension Fabrica 2.0 micro-AM technology. Nano Dimension has focussed its resources
into the development of a commercially viable mass production AM platform specifically for micro manufacturing applications, and so as such has pioneered a technology that facilitates process change in the micro manufacturing arena. For the first time, micro manufacturers can now realistically assess a shift to AM from conventional manufacturing processes as they attempt to push the envelope in terms of innovation. OEMs can therefore benefit from the inherent advantages that AM offers in terms of promoting part complexity with no increase in
36 DESIGN SOLUTIONS FEBRUARY 2022
and numerous medical components such as micro valves, micro syringes, and micro implantable or surgical devices. Beyond direct manufacturing per se, Nano Dimension has devoted significant time and resource to the production of direct rapid soft tooling (DRST). Moulds typically take about an hour to manufacture, cost in the order of $20, and have been used successfully on a traditional 35-ton injection moulding machine using pressures of 400 bar at 230˚C. Multiple soft tools can also be made together. Specifically for Accumold, for 30 years
plus providing a world-leading micro moulding, the hugely impressive technology that Nano Dimension has developed will in short
cost, eliminating the needs for expensive tooling, reducing part counts and the need for assembly, speeding product development time, easy revision of part design, mass customisation, reduction in waste, and reduction in energy costs. The Fabrica 2.0 micro-AM system combines
innovation in materials, software, and hardware to allow the repeatable mass manufacture of micro parts and components with micron-scale features. Today it is a viable technology for manufacturers in the areas of micro optics, semi- conductors, micro electronics, MEMS, micro fluidics, and life sciences, making products such as casing for micro-electronics, micro springs, micro actuators and micro sensors,
order add significant possibilities for its customers. With the Fabrica 2.0 Accumold can already cater for customers requiring low to medium sized runs economically, as the same economies of scale do not exist when using AM as opposed to traditional moulding technologies. With the Fabrica 2.0, the company can also create micro parts with geometric complexity either impossible or prohibitively expensive using the micro moulding process. However, it is in the area of direct rapid soft
tooling (DRST) that huge future opportunities exist. DRST unlocks new business possibilities for Accumold and its customers as up until this point the company has been restricted to the use of long lead time and expensive traditionally manufactured mould tools for the achievement of any volume of moulding, from prototype runs all the way through to mass manufacture. The Fabrica 2.0 stimulates the business case for a process chain that includes DRST, with the possibility of dramatically shorter lead times from file to injected part and at costs reduced from thousands of dollars to tens.
A STRATEGIC MOVE This will be a game changer for some of our customers. For many years, the micro
manufacturing sector has been keeping an eye on AM/industrial 3D printing to see how the technology may be of use. Accumold is truly excited about what the micro-AM has to offer, and sees its incorporation into its facilities as an important strategic move which will further reinforce its market-leading credentials in the micro moulding arena. It also plays to the fact that the future of AM is not as a replacement to traditional manufacturing processes that is used daily, but instead is a complementary technology that adds to the agility and versatility of its product development services.
Accumold
www.accu-mold.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66
