Advertorial
MODUTHERM BOILER RANGE DELIVERS ON ALL LEVELS
M
odutherm has introduced the Genesis FS ULTRA range of floor standing
gas condensing boilers. Ideally suited to larger commercial heating applications, including schools, offices, retail outlets, hotels or heat networks, the flagship FS ULTRA is available in eight models with outputs ranging from 334kW to 2666kW from a single unit, or cascade installations up to 16 boilers. All models can operate at a ΔT
up to 30oC and a 6 bar pressure, while offering turndown ratios up to 30:1. The boiler range also delivers excellent durability and efficiencies up to 109%, thanks to a NHEXT® stainless steel heat exchanger, while an integral BLUEJET® premix burner provides high flame retention and stability. NOx emissions are also kept below 36mg/kWh (Class 6), easily exceeding the requirements for the best BREEAM NOx rating to provide two credits. To further improve efficiencies, the FS ULTRA range has a low water content design, which facilitates
rapid heat up times, as well as reduced fuel consumption. The design also keeps unit weights and dimensions to a minimum, making them perfect for roof top plant room installation and for applications where space is at a premium. Commenting on the boiler range, Ian Bradley, Managing Director of Modutherm, said: “Commercial
boilers are still essential products for many of the UK’s buildings, especially in larger properties, or when retrofitting old and inefficient units. In such cases, opting for a highly efficient and low emission boiler, such as the FS ULTRA, is a great choice and can dramatically improve efficiencies and running costs.” The FS ULTRA heat exchanger carries a five-year guarantee, while an extended 10-year parts and labour guarantee is also available with an annual Modutherm service plan. For more information on the Genesis FS ULTRA boiler range, or Modutherm’s full range of commercial heating products, visit our website.
www.modutherm.co.uk
Aquavent – The best and trusted protection from hydraulic shock.
F
it one to your boosted system and forget burst pipes. The Aquatech Pressmain
Aquavent successfully removes the cause of hydraulic shock by breaking the vacuum and solving the water hammer problem on boosted water systems. Aquavent prevents burst pipes and flood damage. This bestselling protection valve is
fully automatic, made from brass and built to last. It will always engage when required. One size is suitable for all boosted water systems, thoroughly tested before leaving the UK factory, WRAS approved, easy to fit and maintain. We strongly recommend that an Aquavent is fitted on every boosted water riser, where the distance between the highest and lowest pipework in a building is greater than 10.2 metres. To find out more please visit our website.
C
IN FOCUS
DOMUS VENTILATION EXHIBITS AT SPECIFI EVENTS ACROSS THE UK & IRELAND IN 2022
T
his year, Domus Ventilation is pleased to announce it is exhibiting at even more Specifi Mechanical Services events than ever before. Three shows - in
Bristol, Manchester and Birmingham - have already been held and a further five are booked for the remaining year, in London, Edinburgh, Dublin and Leeds. Aimed at the full gamut of specifiers in the construction sector, the Specifi events provide a more relaxed, informal alternative to major exhibitions. They are designed for networking and professional development through the sharing of information. Domus Ventilation’s experienced Specification Sales Manager, Russell Beardsworth, will be attending all the Specifi shows booked by the company. He will be advising visitors on the latest, cost-effective ventilation solutions available for residential and light commercial applications. Russell will also be highlighting Domus Ventilation’s new and updated RIBA and CIBSE CPD accredited courses on residential ventilation, which have proven very popular amongst specifiers. Domus Ventilation takes a whole house approach to ventilation, with mechanical extract appliances,
ducting and accessories designed and tested to work in harmony and achieve the highest possible efficiency. The company strives to deliver ever more efficient products and systems, including the latest MVHR systems: HRXE-HERA™ and HRXE-AURA™. These units feature advanced heat exchange proficiency enabling up to 95% of waste heat to be recovered. They come with 100% thermal (summer) bypass which automatically activates when the air temperature reaches a pre-set level, allowing in cooler, fresh, filtered air without warming it through the heat exchanger. Designed to work on the supply leg of a ducting system of a mechanical ventilation system, Domus
Ventilation’s NOX-FILT, will also be discussed. This innovative filter prevents up to 99.5% of NO² pollution from entering a home. A second unit in the range has the added benefit of a PM2.5 pre-filter. With air pollution now a major issue, the NOX-FILT provides residents with added protection. Further Domus Ventilation products to be highlighted at Specifi, will be the CMX-MULTI Mechanical
Extract Ventilation (MEV) unit; a selection of extract fans, including the recently released D-dMEV single flow, continuous running decentralised mechanical ventilation fan; ducting and ducting insulation; and products that enable compliance with Building Regulations Fire Safety Approved Document B, such as the new Solis air brick. Domus Ventilation has a well-deserved reputation for quality, supported by excellent technical support,
from a market leading manufacturer and designer. It is well placed to offer immediate, practical solutions to Building Regulations Parts F & L. For more information on the location and times of Specifi events, plus to register for free attendance,
go to
www.specifi.co.uk. For more information on Domus Ventilation, go to our website.
www.domusventilation.co.uk.
Double Linear Radiant Heaters
ombat Heating Solutions, Europe’s leading developer and manufacturer of energy efficient radiant and warm air heating systems, introduce you to their double linear radiant heaters as part of their radiant tube heating range. Complete™ double linear radiant heaters have all the benefits of the linear tube but with only one
flue point for the two linear heaters which are connected via the discharge fan. The two heaters comprising the double linear format are designed to be opposing each other producing a long strip of radiant heating coverage. Complete™ radiant heaters can provide even heat distribution from a vacuum design with uniform
tube temperatures. CE design certified; the Complete burner box design includes a protective enclosure allowing minimal heat exposure to valuable electrical controls. Available in natural gas or propane gas, the burner is equipped with a fully automatic, three-try 100%
shut off, direct spark ignition module. New features include deep dish, a wide parabolic design reflector with 12 surfaces that reflect 100%
of the infrared energy that it receives from the heat exchanger tube directly to the floor, resulting in an outstanding radiant heat efficiency factor. Further benefits of the double linear radiant heaters; they are Ideal for facilities where reduced fabric
penetration is desirable. A Large selection of burner inputs and tube lengths for various applications is available. They are Ideal for new or old buildings and have suitability for spot heating applications. Visit our website to find out more.
www.aquatechpressmain.co.uk 38 BUILDING SERVICES & ENVIRONMENTAL ENGINEER MAY 2022
www.combat.co.uk Read the latest at:
www.bsee.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50
