Feature sponsored by
Test & measurement
Gas analyser helps optimise carbon canister performance
8. KEEP TRACK OF yOUR RETURN-ON- INVESTMENT.
In many cases, an OGI camera can pay for itself on the very first day. Surveys performed with an OGI camera are generally nine-times faster than with traditional leak detecting technology, and they can help you detect leaks you might miss with a sniffer. OGI is also a non-contact method that can be
performed during normal operations - so companies do not lose revenue to shutdowns. Plus, by catching leaks early and making repairs quickly, companies can both avoid fines and retain gases they could sell for profit.
9. CONSIDER FUTURE INDUSTRIAL EMISSIONS REGULATIONS.
Fugitive gas emissions contribute to global warming and can potentially pose deadly risks to both workers and people living close to these facilities. Because FLIR OGI cameras detect dozens of volatile organic compounds, such as benzene, they help contribute to a healthier environment while allowing companies to comply with existing industrial emissions regulations. These regulations are not static: there is always the chance government regulators such as the US Environmental Protection Agency or the EU Industrial Emissions Directive could adopt more strict rules on fugitive emissions. Having the right tools to meet these regulations puts your company ahead.
10. GET THE RIGHT TRAINING.
Learn from experienced and qualified OGI users to get the most out of your camera. You might follow a training course by quality organisations such as the Infrared Training Center (
www.infraredtraining.com). The ITC offers low-cost online training called
“OGI Fundamentals” as well as a three-day Optical Gas Imaging certification class covering: the set up and operation of FLIR GF-Series cameras, which gases these cameras can see, and how environmental conditions affect gas leak detection. The OGI Certification training includes classroom instruction, hands on demonstration labs and includes continental breakfast and lunch. Students completing the training course will receive an OGI Infrared Thermography Certification and a wallet ID card.
Teledyne FLIR
www.teledyneflir.com Instrumentation Monthly August 2022
development. However, internal combustion engine vehicles also represent an opportunity for evaporative emissions, so vehicles are fitted with a carbon canister to prevent such releases. MAHLE ANAND Filter Systems - India, a leading global manufacturer of carbon canisters is using a flame ionisation detector (FID), Signal’s S4 SOLAR analyser, as part of its ongoing research and development programme, to optimise the performance of the carbon canisters which it supplies to global and domestic automotive manufacturers. Based at the MAHLE ANAND Filter Systems
M
facility in Pune, India, test laboratory manager Sagar Awate has been using Signal’s heated FID analyser for over two years for measuring total hydrocarbons (THC). “The S4 SOLAR FID Analyser is an important instrument within our research and development programme,” he explains. “We are constantly trialling new fuels and investigating the emission level (DBL – diurnal breathing loss) of our carbon canisters over a range of different temperatures as per the CARB and EPA procedures which are used worldwide. A temperature profile gradient is created with the use of a programmed environmental chamber. “By collecting and analysing evaporative
emissions from the carbon canister over a specific temperature profile, we are able to fully assess the canister’s bleed emission level. The analyser therefore plays a vital role in finding the THC ppm value from the gas sample collected inside a Kynar bag, and we are pleased to report that S4 SOLAR FID Analyser has performed very well. With a user-friendly interface and operating software that is simple to configure, our staff are very comfortable with the use of the instrument.”
Carbon Canisters
The main function of carbon canisters is to reduce the amount of air pollution that vehicles create, whilst also increasing fuel efficiency. Hydrocarbon vapours arise from fuel in the fuel tank, even when the engine is turned off, and carbon canisters are designed to trap that vapour and feed it back into the engine. Carbon canisters are filled with charcoal or
carbon pellets that are able to adsorb hydrocarbon vapours. The canister input (tank port) connects to the fuel tank, while the canister output (purge port) connects to the purge valve in the vehicle's intake manifold. The vent port of the canister is open to the atmosphere. When a vehicle is turned off, there is a
pressure imbalance within the fuel tank which causes fuel to evaporate. As the tank is
any Signal Group customers employ the company’s gas analysers to measure the combustion emissions from engines that are under
connected to the canister by means of hoses/pipes, all of the vapours generated inside the fuel tank enter the carbon canister. In line with the canister’s design capacity, it holds the vapours coming from tank whilst the vehicle is in the parked condition. Whenever the engine is started, the purge valve opens and the vapours inside the canister are desorbed into the air passing to the engine, where they are combusted. This process is known as “purging” of the carbon canister. During the purging process, fresh air from the atmosphere enters into the canister through the vent port and flows toward the engine, carrying fuel vapour with it. It takes a few minutes to complete the purging process; after which the ‘fresh’ canister is able to absorb vapour from subsequent cycles. Canisters remain functional while vehicles are running.
Monitoring evaporative hydroCarbons
The carbon canister tests are based on the procedures outlined in the United States Council for Automotive Research (USCAR) LEVIII / TIER 3 Bleed Emission Test Procedure (BETP) Recommendations . The USCAR procedure enables equipment
manufacturers to produce repeatable and reproducible results. Two methods of hydrocarbon capture are specified in the document; the Bag Method and the SHED (sealed housing evaporative determination) Method; both of which require the use of a FID. Signal Group is able to provide FID analysers for both methods. FID is a standard reference method for the
analysis of gaseous hydrocarbons. The FID is a highly sensitive but non-selective sensor which employs a flame to strip hydrogen atoms from a hydrocarbon molecule, forming carbon radicals and electrons. This is usually a short- lived condition with the charged components quickly recombining, however, in an electrostatic field, components with opposite charges are driven towards electrodes. This creates an effective current within the flame, which is proportional to the number of molecules of hydrocarbon present. The SOLAR range of FIDs are the latest 4th
generation design; benefitting from knowledge and experience gained over 40 years to deliver accuracy, reliability and ease of use. Commenting on the advantages of this latest technology Signal group managing director James Clements says: “Every S4 analyser is supplied with software to enable operation of the analyser remotely using LAN/RS232. This means customers can access their monitoring data from anywhere and at any time, and if they have any service questions, we are able to log in remotely.”
Signal Group
www.signal-group.com 19
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
