Flow, level & control


Improving water management with level measurement


By Claudia Homburg, VEGA Controls W


hen rivers suddenly overflow their banks, or drinking water becomes scarce, water distribution strategies have to be


rethought. In Belgium, this task is carried out by the Flanders Environment Agency VMM (Vlaamse Milieumaatschappij). The environmental agency measures and monitors water quantity and quality, manages water systems and levies fees on water pollution and groundwater extraction. It also advises on environmental permits and supervises infrastructure planning, as well as the monitoring and supply of drinking water. When it comes to rivers or any other form of flowing water, VMM relies on IoT solutions and adopts an integrated approach that focuses on limiting the risk of flood damage and achieving a high ecological status. In the early days, ultrasonic sensing was used to measure the water level in non-navigable streams, canals and rivers. However, this measuring method has a major drawback, especially outdoors: the sound propagation time depends on the temperature, which can result in considerable measurement errors due to temperature changes or solar radiation. Thick fog, wind and rain, as well as buildup of dirt will also influence ultrasonic measurement. Even cobwebs can cause inaccurate readings, as they gather debris, they interfere with the measuring signal, resulting in an increase the blocking distance, or dead band, typical of ultrasonic sensors. Added to this were ongoing maintenance problems. Radar sensors, by contrast, are not bothered


by dirt, sunlight, fog, wind or rain. They also do not require mechanical protection from high floodwaters. For that reason, the decision was made over 15 years ago to change the sensor type and since then the agency has relied on radar technology from VEGA. They first worked with the radar level


sensor VEGAPULS 61 with PVDF antenna for many years, then later with VEGAPULS WL 61. In the course of the collaboration, they especially appreciated the solution-oriented attitude of the Schiltach-based company, as Johan Eylenbosch, hydrographer and electrical mechanic at VMM, confirms: “Whenever a problem arose, the service and additional information provided by VEGA was very good


50


and helpful.” This was to be reconfirmed by the next project the agency undertook. Due to climate change, a new challenge arose: come up with a way to get a comprehensive overview of water levels at a wide variety of locations at any time of day. VMM’s idea was to build a fine-meshed network of real-time level measuring points. Important measuring points are, for example, smaller, non-navigable watercourses, where information is gathered to help mitigate water shortages or predict floods. Such measured values form the basis for taking more far-reaching decisions, for example to introduce local or regional water withdrawal prohibitions. The agency was particularly focused on periods of prolonged drought, which been the order of the day in recent years. In an effort to improve water management, VMM wanted to have smart IoT level sensors for continuous level measurement of rivers. Up until then, setting up such measuring points had only been possible with considerable effort and expense. “To install a river level measuring point, the sensor, together with an adequate housing, sometimes had to be set up in the middle of nowhere and the necessary cables laid underground. We also needed special software to configure the system. And we also had to collect, amalgamate and process the measurement data,” says Eylenbosch, citing just a few of his concerns at the time.. When the compact radar level transmitter VEGAPULS C 11 became available, many of those problems vanished in one fell swoop. The instrument contains a newly developed radar microchip that was specially optimised for the requirements of level measurement and, thanks to its high level of integration, makes it possible to build very compact sensors. The new VEGAPULS C 11 measures with a frequency of 80 GHz, which enables very good signal focusing. This allows better separation of measurement signals from interference signals – measurement is thus much easier and more accurate than with other measuring methods, such as ultrasonics. And the very small beam angle of only 8° is ideal for the application, as Eylenbosch notes: “Some channels are very small. Thanks to the narrow measuring beam, there are easier ways to install the sensor in tight spaces. For example, we can mount the sensor very close to the wall.” Thanks to its


encapsulated cable and protection class IP66/68, the new radar sensor can be immersed in water in the event of a flood. Every 15 minutes, the radar measurement is activated and the measured value sent to the VMM database via a remote telemetry data logger. “This makes it possible to gain a better insight into our water supply and distribution reality and to calibrate our hydrological models,” explains Eylenbosch further. Incidentally, any citizen can also access these data – the current readings can be viewed by anyone via the web. Once the decision was made, VMM procured 50 compact VEGAPULS C 11 radar level sensors and installed them with microcontrollers at numerous locations in five provinces. The exact location of each one is determined via a GPS module built into the data logger. “Most of the measuring points are located in open watercourses and are actually not problematic. So we could also have used ultrasonic or pressure sensors,” says Eylenbosch, clarifying the reasons for the decision. “But the simple installation of the radar sensors via Bluetooth and the high measuring accuracy of ±5mm, not to mention the very reasonable price, tipped the scales in favour of radar measurement technology. The instruments are also completely solar powered, which makes them even easier to operate and maintain. So the significantly lower energy consumption of the new radar sensors was helpful to us in many respects.” “We now have reliable, energy-efficient


measurement 24 hours a day,” continues an enthusiastic Eylenbosch, who is convinced that the need for additional measuring points will increase in the future. Expanding the sensor network is not a problem: A new level measuring point can be put into operation quickly and easily at any time and integrated into the existing network. As soon as the level measurement module is installed, the instrument goes online automatically. The administrator only has to fill out a few fields in a digital activation form beforehand – all subsequent measurement data are then automatically transferred to the database in a continuous stream. This ensures that the level data becomes quickly available on the data platform.


VEGA Controls www.vega.com April 2022 Instrumentation Monthly


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78