ADVERTORIAL TECHNOLOGY IN ACTION
High contrast graphic OLED display SPI / I²C interface + touch-screen option
M Mega_Bridge
ega_Bridge adds flexible and fully featured internet protocol (IP) connectivity to the well-
established Mega_Link family of telemetry communication units used to pass two-way instrumentation, measurement and control data between sensors, equipment and industrial plant.
• Telemetry & Control • Flexible Communications • Sensor & Data Interfaces • Built-In Security VPN • Remote Node Management
Communications via Cloud Services
Mega_Bridge can communicate on a closed LAN or across networks and sites via Amazon Web Services, fully administered by Churchill Controls. This enables important security features using TLSv1.2 for authenticated and encrypted communications channels. VPN routing further secures the network, encrypting data for a fully secured and transparent system for end users.
Churchill Controls 01344 750233
www.churchill-controls.co.uk
MS Electronics Ltd has available a new series of OLED displays. These OLED displays offer excellent readability with high contrast and very wide viewing angle. These OLED displays have a very fast response time over a wide temperature range from -40°C to +80°C. The EA OLEDL128-6 displays with 128x64 pixels are available in six versions. The standard version is EA OLED128-6LGA. Available in Yellow, Blue, White and Red. Then we have the EA OLED128-6GGA with a scratch, shock, and UV protective front glass. There is also special version EA OLED128-6NGA for use behind smoked glass, supplied without polarizer and providing even greater brightness. The module size is 67.8 x 47.9 mm with view
area 64 x 37 mm. Interface is SPI and I2C with integrated SSD1309 controller. The connecting pins on the displays are a 2.54mm (0.1 in) pitch.
MMS Electronics Ltd 01943.877668
www.mmselectronics.co.uk
Abacus cold mains water meter type Em scaled 0-999 litres in steps of 1 litre
Hertfordshire company Aquameter has developed the ABACUS digital water measuring system for dispensing accurate preset quantities of water straight into mixing vessels, tanks, etc. Easy to install and simple to use, the ABACUS delivers repeatable results day in, day out, reliably and consistently. Thousands of units have been sold worldwide to a whole variety of industries where water is added to powders or granules for mixing purposes. Just dial in the batch amount required and press the start button. The unit stops the flow of water when the required quantity has been delivered - easy.
A
Aquameter Ltd 01992 442 861
www.aquameter.co.uk
Achieve High Performance in Bioreactor Process Control
enable consistent, repeatable production of high quality pharmaceutical products, batch after batch.
METTLER TOLEDO has decades’ of experience in developing innovative sensor and transmitter solutions that meet the needs of the pharmaceutical industry. Our Intelligent Sensor Management (ISM) technology is embedded into our solutions, providing a wide range of benefits including predictive sensor diagnostics, pre- calibration of sensors, and electronic documentation for compliance purposes.
Our bioreactor process control best practice guide contains a collection of case studies highlighting the challenges faced by pharmaceutical companies during biopharmaceutical fermentation, and how to optimise their manufacturing operations. Designed to help production managers, engineers and technicians find the most appropriate measurement solutions to make their processes smarter, faster and more cost-effective, our guide includes:
achieved through in-line measurement of analytical parameters. In-line measurement using process analytical equipment reduces the workload of laboratory staff by measuring directly in the process, eliminating false readings due to contamination, and supplies real-time measurements that allow for rapid corrective action. In-line analytical measurements also
H 42 APRIL 2018 | INSTRUMENTATION
igh performance and consistent process reliability is crucial in pharmaceutical operations, and can be
• Reliable, repeatable fermentation processes • Optimal growth conditions • Batch-to-batch consistency and increased yield • Easy traceability and error-free documentation • Energy savings with optimum control of air intake • Compliance with regulations
METTLER TOLEDO 0116 234 5095
enquire.mtuk@
mt.com
www.mt.com
New Battery Powered
Indicators Provide Switching and Datalogging Functions.
new DM650 battery powered product range.
S
• DM650TM temperature switch accepts both Pt100 or thermocouple temperature probes
• DM650PM pressure switch measures pressure up to 100 bar
• DM650HM humidity switch measures temperature and humidity
• DM650VI process signal switch measures analogue signals such as voltage or mA
Housed in a plastic abs IP67 enclosure, the instrument is equipped with a volt free change over relay contact. The user may select relay actions of switch high, switch low and also includes deviation, with fully adjustable set point and hysteresis. The relay can be linked to switch on the process value or can be linked to battery condition if required. The instrument includes a datalogging function where the process value can be recorded and retrieved for analysis.
Status Instruments Ltd 01684 296818
www.status.co.uk
CONNECTINGINDUSTRY.COM/INSTRUMENTATION
tatus Instruments have launched their brand-
dding a preset quantity of water to a mix has long been carried out using pails or hosepipes. Not very accurate and certainly no consistent. Now,
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
