Editor’s choice ULTRASONIC FLOW METERS: CLAMP-ON VERSUS IN-LINE FOR ADVANCED FLOW MEASUREMENT U
Titan Enterprises discuss the advantages and disadvantages of clamp-on and in-line ultrasonic flowmeters and the process applications most suited for these types of measuring devices.
ltrasonic flow meters represent a significant advancement in flow measurement technology, offering precision, versatility, and ease of use with no moving or internal components. Providing
improved electronic processing, increasing diagnostics and excellent accuracy, ultrasonic flowmeters operate using ultrasound to measure the velocity of a fluid flowing through a pipe of known dimensions giving the volumetric flow. There are two main types:
1. Transit-Time or ‘time of flight’ Ultrasonic Flow Meters: Measure the time difference between ultrasonic pulses sent in the direction of the flow and against the flow. The difference in the transit time is directly proportional to the flow velocity.
2. Doppler Ultrasonic Flow Meters: Measure the frequency shift of an ultrasonic signal reflected by particles or bubbles in the fluid. This frequency shift is used to calculate flow velocity.
Ultrasonic flowmeters can be either integrated into a pipe to measure the stream of flow ‘in-line’ or clamped onto the outside of an existing pipe. In-line and clamp-on flowmeters are both commonly used for measuring the flow rate of liquids and gases in various applications. Each type has its own set of advantages and disadvantages, which makes them suitable for different industrial applications.
IN-LINE FLOWMETERS Advantages:
1. High Accuracy: In-line flowmeters are generally more accurate because they are directly inserted into the pipeline, sometimes measuring over the entire cross-section of the pipe using multiple sensor sets to produce more accurate data for precise measurement of flow rate.
2. Independently calibrated: As a separate unit they can be finely calibrated by the supplier or independent calibration house to specific standards which will be directly relatable to the final installation.
14 3. Variety of Measurement
Technologies: Though we are focusing on ultrasonic flowmeters here, in-line flow devices can use various other technologies such as turbine, magnetic, vortex, or differential pressure, which can be chosen based on the specific requirements of the application but ultrasonic has the added benefit of minimal or no flow restriction.
4. Stable Performance: These flowmeters tend to provide stable and consistent performance over time, making them reliable for long-term use.
5. Wide Range of Applications: Suitable for both liquid and gas flow measurements, in-line ultrasonic flowmeters can handle high pressures and temperatures depending on the construction material and design.
Disadvantages:
1. Installation Complexity: Installing an in-line flowmeter typically requires cutting the pipe and sometimes halting the process to empty the pipe prior to installation, which can be time- consuming and costly. Additional fittings may also be required.
2. Maintenance: Maintenance can be more challenging as it might require shutting down the process and disassembling parts of the pipeline.
3. Permanent Installation: Once installed, they are not easily relocated, making them less flexible if the measurement points need to be changed frequently.
In-line flowmeters are preferred for applications requiring high accuracy and stable, long-term measurement. Despite their higher installation costs, being electronic devices, their lifetime costs are relatively low. They are often used in Custody Transfer industries, such as oil and gas, as the high accuracy over time and the low maintenance costs recoup the initial installation expense fairly quickly.
March 2025 Instrumentation Monthly
4. Portability: These flowmeters are often portable and can be moved to different measurement points, providing flexibility for temporary installations or spot-check measurements.
CLAMP-ON FLOWMETERS Advantages:
1. Non-Invasive: Clamp-on flowmeters are installed externally on the existing pipe, eliminating the need to cut or alter the pipeline, or drain the liquid. This makes them ideal for applications where the process cannot be interrupted.
2. Easy Installation and Maintenance: They are easy to install and maintain as stopping the flow or cutting into the pipe is not required. They can also be installed in difficult locations or tight spaces. Although there will be serious accuracy implications of doing this, it may be assessed as an acceptable process risk/ penalty overall.
3. Usability: They can be fitted to a variety of pipe sizes, including large pipe diameters, and can be used on a variety of fluids. They can also be used to validate the performance of existing in-line flowmeters.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
