TECHNOLOGY IN ACTION ADVERTORIAL
with an all new, cost-effective range of professional cutting discs.
Specifically developed with operators in
Curtiss-Wright launches new TILT SENSOR
tolerant tilt sensor that offers an optimal combination of performance, safety and cost in dynamic applications, making the sensor ideal for pitch and roll detection for on- and off-highway industrial-vehicle applications, including mobile elevating work platforms. This latest innovation uses IMU technology and fast-acting software algorithms to filter out disturbances caused by vibration and vehicle motion. This provides output stability without the measurement delays usually associated with heavily-damped, traditional sensing methods.
C
Additional features and benefits of the VTS2021 tilt sensor include: • Operates from a 6-48Vdc supply, for use on 12V and 24Vdc vehicle systems
• SAE J1939 CANbus output with a choice of baud and frame rates
• Outputs thermally compensated over -40°C to +85°C operating range
• IP67 rating (with mated connector) provides outdoor environmental protection
• Integrated, 4-pin Deutsch DT04 compatible connector for quick, easy installation • >385-year MTTFd
Curtiss-Wright +44 1202 034000
www.cw-industrialgroup.com
urtiss-Wright’s Industrial division has today announced the launch of the VTS2021, a dual-axis, vibration-
mind, the discs combine Saint-Gobain’s exclusive bonding system and ceramic grain, for better mix control during the manufacturing process.
By keeping individual ceramic grains
from clumping together, the discs ensure a more even wear during use and a smoother action for the operator, allowing for a vastly improved cutting action. Operators will also notice a reduction in vibration when using the new cutting discs, which helps to combat fatigue and discomfort in their day-to-day work.
Norton Quantum3 cutting discs are available
in two specific densities – 1.3mm for efficient cutting when working on thin or hollow materials, and 1.6mm for thicker materials and for an extended lifespan of the disc itself.
Ideal for a variety of operations such as maintenance and repair, metal fabrication and engineering, the
impressive lifespan and performance of the Norton Quantum3 discs help save money, reduce waste and result in an improved finish for operators.
Derk Vruwink, Senior Product Manager at Saint-Gobain Abrasives adds: “The thickness of both the 1.3mm and
1.6mm discs enables the ceramic grain to work more efficiently and effectively. The thicker tolerance of the disc and the bond to grain ratio means you can feel the speed of the disc as it cuts through the surface material – meaning reduced effort is required from the operator.”
Norton | Saint-Gobain Abrasives 01785 279553
www.nortonabrasives.com
Norton launches Quantum3 professional cutting discs S
aint-Gobain Abrasives is adding to its exclusive range of Norton Quantum3 grinding and combination wheels
O
ut of the 75 employees currently working at Union Industries, 10 have been with the company for more than 20 years. Having joined early on in their careers, nine have
been promoted and have personally developed within the business. Union Industries celebrated the combined 260 years’ long service at its annual staff
party, which marks the anniversary of its Employee-Ownership (EO) status. After 25 years with the company, employees are presented with a special award in recognition of their long service achievement.
Union Industries became an EO organisation in 2014. Under the ownership scheme
every qualifying employee was awarded an equal share of the business. Although the company has always boasted a committed workforce, becoming EO has further empowered its team as well as offering the added financial incentive of an annual tax-free bonus.
Richard Balmforth, Master Craftsman, is Union Industries’ longest serving staff
member, with 37 years’ service. Father and son, Neil and Craig Flockton (Logistics and Foreman Finishing Shop) have
been with the business for 42 years of combined service (23 years and 19 years respectively). Principal CAD Engineer, Craig Pace, and Fabric Welding Engineer, John Blockley, have both worked for Union Industries for 20 years, with Welder/Fabricator Team Leader, Phil Sutton, and Admin Supervisor, Jenny Slight, having both served 21 years and Peter Allen, 22 years. Tony Metcalfe, Operations Director, has worked with the company for 23 years. Production Co-ordinator, Shaun Hannan, has completed 28 years whilst Installations Manager, Graham Carse, has served 26 years.
Tony Metcalfe said: “Union Industries is a very special company and people honestly
believe that it’s a privilege to work here. The business is keen to play a part in the progression and development of its employees and the fact that we are all owners of the company makes us personally invest in its future success.
Union Industries 0113 244 8393
www.unionindustries.co.uk
FACTORY EQUIPMENT | FEBRUARY 2019 43
Long-serving employees at Union Industries. Left to right: Peter Allen, Richard Balmforth, Tony Metcalfe, Graham Carse, Shaun Hannan, Neil Flockton, Craig Flockton, Phil Sutton and Jenny Slight.
“Most importantly, employees are valued at Union Industries. The EO bonus is shared
equally, regardless of the person’s job title, and it creates a sense of appreciation and a family atmosphere. Since becoming an EO company each of its employees has enjoyed £10,000 tax free in bonuses.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54
