• • • CABLES & CONNECTORS • • • Latest trends in fibre optic cabling
The largest transformation in the data centre industry since ‘Cloud’ is ‘Edge’, with Edge DC’s bringing power, connectivity, and compute resources physically closer to where those assets are used, says Stephen J Morris, senior product manager, EMEA, Data Centre Connectivity Solutions, Panduit
A
wide range of next generation applications will be supported by Edge data centres providing customers with lower latency,
higher security, and greater control over their data. Edge data centre deployments are moving
from strategic planning phases to execution and 2021 has seen multi-tenant data centres become host for an expanding ‘Hyperscale’ client base who are deploying Edge resources across the EMEA region and beyond. The result is an explosion in the frequency of small-medium size projects, which are additional to traditional large-scale Enterprise on-premise and data centre deployments. Deploying multiple projects, across multiple
countries at the same time places immense pressure on project managers looking to ensure projects run on time and to budget. Dependency on supply chain has never been greater with supply resilience, redundancy, channel, service and support key factors to deliver a successful program. Having the right products, in the right place at the right time is just the start. Fibre data centre networks are becoming more
evenly distributed geographically, more fibre count dense and are operating at increasingly higher speeds with Ethernet applications moving from 10G to 50/100/200 & 400G. Higher density fibre distribution systems,
smaller diameter cables and smaller connector solution are in part answering the fibre ‘densification’ challenge. However careful consideration must be given to ensure higher density solutions do not come with added (circuit) downtime risk. The value of each fibre circuit is increasing exponentially, for example you could consider a 100G circuit 10X the value of a 10G circuit. Service, scalability, and manageability of high-
density fibre distribution systems is a key consideration to ensure system moves, adds and changes (MACs) are handled efficiently and ‘rip and replace’ scenarios avoided where appropriate. There is increasing uptake and interest in the
use of high core count ribbon cables, for example 288F, 576F or 864F. These can reduce cable diameter, and therefore cable volume, as an alternative to using a make-up of multiple smaller fibre count cables, thus take up less space in cable management systems and pathways. Such cables can be offered factory pre-terminated, in many situations this can reduce installation time by as much as 75 percent compared to field terminated systems. Speeding up the installation process, field
splicing ribbon fibres (12F spliced at the same time) provides greater efficiencies compared to traditional single fibre splicing practice.
30 ELECTRICAL ENGINEERING • APRIL 2022
electricalengineeringmagazine.co.uk A new breed of small form factor fibre
connectors has been developed to address growing application needs, with the market yet to decide on their widespread adoption and popularity, these include MDC, SN and CS. Panduit has extended its HD Flex platform to offer CS connectivity.
Key benefits at a glance • Double density in QSFP-DD and OSFP transceiver vs LC;
• 50% greater port density (per RU) in Panduit’s HD Flex™ cabling system;
• Push/pull feature facilitates access in high- density applications without disturbing adjacent circuits;
• Unitary cable reduces congestion in pathways and cable management;
• Easy to breakout – can negate the need for a harness (fan-out) in select applications; and • Single mode and multimode options.
Enterprise Networks Gigabit Passive Optical Networking (GPON) is becoming increasingly popular having gained more active support from leading active equipment manufacturers including Cisco. GPON lowers the cost of ownership by reducing
cabling, lowering power and negating need for an equipment closet (or Telcom/data room) vs a traditional two or three-tier switched Ethernet solution. GPON deployment is forecast to grow double-
digits year-on-year reaching $38bn by 2027 (Global Industry Analysts, July 2020) with a special interest
from building owners looking for a solution with energy efficiency, simple management, and minimum cabling. With a focus on both greenfield and brownfield
opportunities in hospitality, school campuses, office buildings, defence and healthcare facilities Panduit has recently extended its high-density fibre distribution product line (HD Flex) to include optical splitter models that are ideal for PON/GPON network deployments.
What are the benefits of fibre optic cabling as compared to
traditional copper cabling? Bandwidth (information carrying capacity) and distance (reach) are two primary reasons for choosing fibre over copper. Fibre is considered more future proof than copper and will extend beyond today’s ethernet speeds of up to 400G to support the future Terabit roadmap. Fibre is immune to the effects of
electromagnetic interference and radio-frequency interference (EMI/RFI) and cross talk which can cause performance challenges and security concerns in copper-based systems. Fibre cable can also be run next to medical or industrial equipment without performance or interference concerns. Fibre is light weight and smaller in diameter
(compared to copper) - this can improve cable management and reduce space in cable pathways. Smaller cable diameters also improve visibility of port labels and active equipment LED’s.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
