EXPERT COLUMN | LEEA
Choosing the right mobile support structure
M
obile supporting structures are widely used in the industry in conjunction with hand or power-operated lifting
appliances, where a temporary runway structure is required to perform both lifting and linear moving operations. They cannot on their own be used for lifting operations or classed as light cranes – it is only when fitted with a hoist, hoist and trolley or similar lifting appliance that they become effective lifting structures. With capacities usually of up to 5t, mobile supporting structures are used where a lifting point, runway or crane cannot conveniently or economically be permanently installed. Applications can be as diverse as construction sites, maintenance work, entertainment venues as well as in warehouses and industrial facilities. Their portability gives convenience, but it also imposes restrictions on their use. While they are not intended for movement under load, mobile supporting structures can be moved between locations so the runway can be positioned over the point of lift. The only intended movement of the raised load is along the runway. Special mobile supporting structures suitable for movement under load can be manufactured, but are uncommon due to their high cost. However, given they are visually indistinguishable from standard mobile supporting structure designs, caution should be exercised – unless the manufacturer’s confirmation of suitability for this purpose is clear, assume it is a standard design. Use must be strictly in accordance with the manufacturer’s written instructions. Only a small number of standards cover mobile supporting structures, but those that do generally classify them as manually operated light cranes. Being essentially a movable runway structure, it should be designed, manufactured and tested in accordance with standards relevant to runways and manual light cranes as applicable.
The right design for the right job A wide range of designs and features can be manufactured to suit specific applications, so
16 | July 2025 |
www.hoistmagazine.com
Technical Committee
Keith Tonge from LEEA (Lifting Equipment Engineers Association) Technical Services looks at the types of mobile supporting structures available and where they should be used.
Keith Tonge
selection needs to be carefully considered and fully discussed with the supplier. While not an exhaustive list, the following covers some of the available types.
Goalpost mobile supporting structures
are intended for light-duty and are ideal for occasional maintenance work or similar applications. Their structure is less bulky than other designs, providing operatives with greater freedom of movement around the structure, which is however less robust than ‘A’ frame designs. They should not, therefore, be considered for regular or heavy-duty lifts. Foldaway mobile supporting structures should be considered for light-duty applications requiring regular dismantling of the mobile supporting structure, either for storage or for transportation between sites. ‘A’ frame mobile supporting structures
are designed for heavier-duty work and applications, where the structure will be left in its erected condition. They are ideal for applications that regularly require a mobile lifting facility, such as loading and unloading in yards and open areas, or for use in workshops. With a more robust structure than goalpost designs, they are suitable for general purpose applications.
Self-erecting mobile supporting structures can be considered for heavier-duty applications that require it to be dismantled between periods of use and where no other lifting aids are available to assist in the erection, and where sufficient space is available.
Adjustable height mobile supporting
structures can be used where limited variation of the height of the runway beam is required. Designs vary and in some cases additional stays or guys are necessary to provide stability. Consideration must be given to the space occupied by such stays.
Demountable mobile supporting structures
are suitable for applications where the structure will be left in its erected condition for long periods of service, but occasional dismantling for transportation or storage is required. Consideration must also be given to other lifting facilities necessary to assist in the dismantling and erection operations.
For further guidance on mobile supporting
structures, consult the LEEA Code of Practice for the Safe Use of Lifting Equipment (COPSULE), which can be accessed for free at
www.leeaint.com and offers best practice to prevent the risk of accidents, injuries and equipment damage during lifting operations.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55
