Garage / Shower IP65 Enclosures • Supplied with DIN rail, neutral and earth terminals, cover blanks and busbar
• Manufactured and tested to BS EN 61439 • 5 Module enclosures accept Single Pole RCBOs • Ø20mm knockouts on all sides drillable to Ø32mm • IP20 enclosures are also available, suitable for use indoors
Top 10 time saving tips with Fortress Circuit Protection:
1. Integral Spirit level and tripod fixing points for quick installation 2. Combi style screws means one screwdriver when installing.
3. Quick release raised DIN rail makes first fix faster and allows space for cables to pass below
4. Backed-out captive terminal screws prevents loss of hardware and saves time
5. Offset incomer provides additional space for main incoming cables
6. Larger screws improve cable retention, enabling greater torque on ferruled cables
7. Longer terminal bars for more capacity and greater flexibility
8. Side 32mm knockout can be expanded to accept 40mm gland.
9. Floating busbar provides maximum installation flexibility.
10.Trim supplied to protect cables from sharp edged rear entry knockouts.
Recessed Consumer Units
Recessed consumer units assists the first fix process and prevents hindrance to other trades such as plastering and decorating. The range also offers a smaller profile for narrow passages and where height requirements are specified.
• Available in main switch, RCD, dual RCD, in both populated and unpopulated versions
• Specifically designed to be fully recessed into a wall or cavity up to a depth of 68mm
• Covers have barrel lock installation capability and comes with cover lock blank • Fast and simple installation
Recessed SPD Consumer Units Inclusion of an SPD ensures compliancy with the 18th Edition Wiring Regulations: • Supplied with 100A Main Switch and pre-wired Surge Protection Device
• A range of RCBOs and MCB devices can be fitted into recessed consumer units as required RCBO Know How
RCBO stands for 'Residual Current Breaker with Over-Current'. As the name suggests, it protects against two types of fault combining the functionality of an MCB and RCD.
34 | Wiring Devices and Accessories
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
