16


INTERIORS


Modern Convenience I


t is a great convenience of Horne shower panels that half of any installation is complete, even before arrival on site. Pre-plumbed


in controlled conditions at


Horne’s factory, for consistent quality and robustness, every shower is also fully pressure tested. Installation, therefore, is a quick and simple affair - hang the panel at the chosen location, affix to the wall (four screws), connect the supply pipework and commission into service. Voila!


Designed specifically to withstand challenging environments, the aluminium extrusion casing, anodised and epoxy-coated, is stable and robust for a maximised lifespan. Shower head and control materials are also highly durable; chromium-plated stamped brass, die-cast zinc and stainless steel are tolerant of accidental, or intentional abuse. Three,


healthcare approved (Type


3), shower mixing valves feature across the range, and offer a few flow and temperature control combinations. Designs can also be optimised for secure facilities (ligature resistant) or healthcare, or cognitively impaired,


elderly and accessible


installations (lever controls). Easily mix and match fittings to make a shower for any application, niche or otherwise. Choose from four shower head options; fixed vandal and ligature resistant, fixed swivel, or riser/grab


rail, hose and


handset (single or three function). Integral flow regulators provide optimised flow rates, whilst limiting wastage of pre-heated water. Timed flow control models give additional water and energy savings, and these are particularly suited to the prison estate, but also for recreation, leisure and school sports where showers may be left, inadvertently or intentionally, running. T4 or T9 type showers (as pictured), feature an integral In-Line


Thermal Disinfection Unit plus


key-holed pipe cover. This patented device easily addresses retrograde contamination of the shower and water supply by pathogens. For the protection of vulnerable users, especially in care settings, this proven safety feature facilitates routine thermal disinfection of the shower’s internal pipework, valve, and shower head, utilising the available hot water supply.


ADF04_Horne Engineering_Interiors - Bathrooms_HPAdv.indd 1


The pipe


cover, with same profile


as


the shower panel, can also be specified as an accessory for -A type shower models. Available in two lengths, these accommodate for difference ceiling heights.


Primarily


removing the ligature risk presented by the exposed supply pipework, it also offers a


hygiene cover for easy cleaning and


improved aesthetics. 01505 321455 b.link/ConvenienceShower


06/04/2023 12:14


WWW.BUILDINGCONSTRUCTIONDESIGN.CO.UK


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28