EXTERNAL ENVELOPE 39
Schöck are offering free design support for BSA projects
Thermal breaks in external wall systems play a pivotal role in meeting the revised Building Safety Act 2022. Professional design input is a vital part of this process.
F
ollowing the Grenfell tragedy and the subsequent Hackett Review, The Building (Amendment) Regulations were introduced in December 2018. These set out restrictions on the combustibility criteria of
‘specifi ed
attachments’ forming part of the external wall. For example, balconies, solar panels or solar shading, attached to the external wall of a ‘relevant building’ in England (over 18 m above ground level, or seven storeys). Now, the Building Safety Act 2022 further reforms building safety regulation and has also introduced a Building Safety Regulator; whose primary goal is to improve the design, construction and management of higher-risk ‘relevant’ buildings.
Designers play a critical role in this new regime At Schöck, we understand the increasingly critical role designers now have. Ensuring the safety and compliance of building projects is of course a given, but the avoidance of unnecessary delays by resolving possible issues early on and minimising the need for late-stage changes is also pivotal. That is why we are delighted to offer complimentary design support services, allowing specifi ers to create seamless, compliant, and effi cient thermal break solutions with confi dence. Whether you’re working on connecting balconies, canopies, or solar shading, our thermal
breaks provide exemplary load- bearing insulation solutions.
How does the Isokorb range comply with the Amended Regulations? In part 7(3) of Approved Document B in the Amended Regulations there is a list of materials exempt from the restrictions, which includes thermal breaks. Because Schöck Isokorb thermal breaks form part of the external wall, it is critical that they comply with the Amended Regulations. The Isokorb uses thermal insulation material to improve thermal performance (verifi ed to meet the requirement of Part L by independent thermal testing from Oxford Brooks University) and
consequently they are exempt according to the amended regulations.
What makes Schöck thermal breaks so effective in meeting Part L? The quality of the components used in their construction guarantee superior thermal performance. Stainless steel (in the thermal zone) is used for its greatly reduced thermal conductivity when compared with carbon steel. The HTE (High-performance Thermal Element) module used is a concrete thrust bearing designed to both transmit compressive forces and optimise thermal conductivity. When Neopor®
, an expanded
polystyrene (EPS) insulation with superior thermal performance, is used together with the HTE module, thermal bridging is almost entirely eradicated.
Design of the Isokorb range addresses key safety requirements The Building Safety Act emphasises the importance of using tested and certifi ed
components in safety-critical systems. Substituting specifi ed products, such as thermal breaks, without ensuring compliance and suitability, could breach the regulations, leading to signifi cant liability risks. The Isokorb range exceeds the demands of the Building Safety Act by addressing key issues such as: BBA Agrément Certifi ed to exceed fi re resistance
standards (REI120); helps
mitigate fi re spread risk as required by the Act for use in high-risk residential buildings – and provides critical documentation (including design calculations) to support the ‘golden thread’ of safety information. We would be delighted to partner with you and ensure your BSA projects not only meet, but exceed, safety and thermal performance standards. To leverage our expertise and create a robust engineering solution for your next project, connect with us.
bsa@schoeck.com
www.schoeck.com/en-gb/isokorb
ADF JULY/AUGUST 2025
WWW.ARCHITECTSDATAFILE.CO.UK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
