BS EN ISO 13297:2021+A11:2023 ISO 13297:2020+A1:2022
Annex B (normative)
Instructions to be included with owner's manual Text deleted
An owner’s manual shall be provided with the craft. It shall include instructions for the operation and maintenance of the system, including a wiring diagram with conductor identification, details of fuses and breakers used, data relating to individual power sources, maintenance and operating instructions for electrical connections and shall include at least the following information:
a) Do not modify the craft’s electrical system or relevant drawings. Installation, alterations and maintenance should be performed by a competent marine electrical technician. Inspect system at least biennially.
b) Disconnect shore power connections when the system is not in use.
c) Connect metallic housings or enclosures of installed electrical appliances to the protective conductor system in the craft (green or green with a yellow stripe conductor).
d) Use double-insulated or grounded (earthed) electrical appliances.
e) If reverse polarity indicator is activated, do not use electrical system. Correct polarity fault before activating the electrical system on the craft.
f) WARNING — Do not allow any part of the shore power cable to hang in the water. An electrical hazard can result which can cause injury or death to nearby swimmers.
g) WARNING — To minimize shock and fire hazards:
1) turn off craft's shore power connection switch before connecting or disconnecting shore power cable;
2) connect shore power cable to craft’s inlet before connecting to shore power source;
3) if reverse polarity indicator is activated, turn off craft's shore power connection switch immediately (if fitted);
4) disconnect shore power cable at shore power source first; 5) close shore power inlet cover tightly.
h) Do not alter shore power cable connectors, use only compatible cable connectors and shore power receptacles.
i) Instructions on monthly testing of the RCD. Instruction e) is required for polarized systems with polarity indicator.
Instruction g), second list item, is not required for permanently connected shore power cable installations.
Instruction g), third list item, is required only if reverse polarity indicator is required in the system. NOTE Requirements for craft’s owner’s manuals are provided in ISO 10240.
© ISO 2022 – All rights reserved
23
Distributed by the RYA under licence number 2020ET001 © BSI
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
