“Each year, slips, trips and falls


injure over 180,000 employees, costing employers over £500m.”


Don’t slip up on safety


Employers should consider more than just slip-resistant footwear when protecting employees from slips, trips and falls, say safety experts Arco and slip management experts Bonasystems.


Recent research by Bonasystems reveals that three quarters of floor surfaces tested failed to achieve a safe standard of slip resistance. In some cases, a floor’s slip resistance was so poor, the accident probability was as high as one in two.


Testing floors with the Pendulum test (the HSE-approved method of measuring slip resistance in the UK), reveals many employees – as well as members of the public – are being put at unnecessary risk of injury. Businesses are also opening themselves up to the risk of prosecution and reputational damage by not taking the proper measures to avoid slips, trips and falls on their premises.


Each year, slips, trips and falls are the single biggest type of accident in the workplace, injuring over 180,000 employees and costing employers over £500m, according to the HSE. However, most Health and Safety managers believe that they are doing everything they can to prevent slips within their environment, which often includes the provision of ‘slip-resistant’ footwear for workers. What many businesses are unaware of is that there are many factors which could impact an employee’s, and the general public’s, risk of a slip.


Additional factors that can contribute to slip risk include: • Contaminants that may be on the floor surface or


footwear. • Footwear worn by members of the public. • The floor maintenance regime. • The range of floor types. • Degradation over time.


Because of these contributing factors, the provision of slip-resistant footwear alone for employees won’t mitigate the risk to an acceptably safe level. A recent Arco survey of 175 health and safety professionals uncovered almost 70% buy slip-resistant footwear ‘to reduce the number of slips,


10 | FEATURE


trips and falls in my business’. However, over 60% of the same group had not conducted the necessary testing on the footwear to determine that it was fit-for-purpose in the intended environment.


When comes to using slip-resistant footwear, the EN standards recommend that: “It’s always better to use protective equipment that has been shown to perform well under test conditions that are as similar as possible to the conditions of use.”


Steven Philips, Managing Director of Bonasystems, said: “While most Health and Safety managers acknowledge they have a slip risk, their misunderstanding in terms of best practice means that many are not always taking the correct measures needed to keep their business safe from prosecution and keep employees as well as members of the public safe from avoidable slip hazards.


"Consequently, Health and Safety professionals must do more to address slip risk holistically. Specifically, they need to ensure their floor surface is maintained and, in some cases, treated to a standard that would dramatically reduce the slip risk probability and where applicable, procure footwear for employees which are fit for purpose in the working environment.”


Neil Hewitt, Director of QSHE UK and Asia at Arco, added: “I urge employers to carry out a slip risk assessment, review the suitability of their employee’s footwear and ensure their floor cleaning regime is correct. This can not only help protect employees and, in some sectors, members of the public from injury, but also protect their business from potentially lengthy court cases, fines, personal injury claims and higher insurance premiums.”


www.dontslipup.co.uk www.arco.co.uk www.bonasystems.com


twitter.com/TomoCleaning


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22