CARE HOMES TAKING EXTRA CARE
From moisture testing and subfloor preparation to selecting the correct smoothing compounds and adhesives, F. Ball explains how following best practice can help create flooring installations that support infection control, reduce trip risks and stand up to the demands of busy care environments.
Flooring installations in nursing and care homes require special considerations to help support elderly residents and minimise the risk of any hazards to which they will naturally be more susceptible. With older people more prone to trips, slips and falls, making flooring safe and secure is a priority.
Typically, care settings employ a mixture of carpets and vinyl floorcoverings to meet different needs of its residents. To ensure that finished installations are able to withstand expected levels of daily wear, maintain their aesthetic appearance and safeguard the health and safety of users, contractors should follow best practice in subfloor preparation and floorcovering installation and choose the most suitable products at each stage of the process.
INITIAL STEPS
The first procedure in any flooring installation should be to make sure that the subfloor is suitably sound and smooth and dry, including undertaking a moisture test to determine subfloor relative humidity (RH) levels, using a calibrated digital hygrometer. Where subfloor RH levels are above 75% (65% if a wood floorcovering will be installed), a moisture management solution, such as a waterproof surface membrane, will be required to supress excess subfloor moisture levels and prevent floor failure.
The application of a smoothing compound to create a perfectly smooth base for floorcoverings is usually the next step in the process after priming the subfloor. Smoothing compounds that are protein free, such as F. Ball and Co. Ltd.’s Stopgap 1500, are often specified for areas where infection control is a priority, including hospitals and nursing homes, because they ensure that there is no breeding ground for bacteria.
Stopgap 1500 is also low odour, meaning work can take place while nearby areas remain in use. It is fast setting, fast drying and ready to receive most floorcoverings from as little as four hours after application, ideal when working to tight deadlines and minimising the time accommodation or facilities remain out of use. Further time can also be saved in refurbishments where old adhesive residues are present as the smoothing compound can be applied directly over them, avoiding the need to remove them or prime beforehand.
SAFETY FIRST
When it comes to adhesive selection, contractors should take into account the specifics of a flooring installation.
For example, in areas subject to high levels of humidity or surface water, an adhesive with water resistant properties is essential.
32
www.tomorrowscontractfloors.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
