TEST, SAFETY & SYSTEMS
voltage and temperature that the cell manufacturer has specified from lookup tables. This doesn’t take into account what is actually taking place inside of each battery cell. We often think of the battery as
a component in the car, but really, it’s a system, encompassing a whole universe of mechanics, electronics, chemistry and physics combined. OEMs have traditionally designed around keeping the battery within simple operating parameters specified by the cell partner; but with this simplicity comes the risk of leaving significant performance potential on the table.
CURRENT BMS CHALLENGES State of health (SoH) in batteries is a constant topic of debate, with OEMs placing long warranties, including guarantees on SOH for new vehicles to reassure fleets and private customers. But accurately assessing it is not trivial; we have to interpret the data that the sensors in the pack collect. We find analytically that estimation of SoH from partial charge/discharge data is inaccurate and worsens over time. As the battery degrades, State of
Charge (SoC) error develops as its dependency to the measured open circuit voltage (OCV) becomes corrupted and morphed over time. In most cases, SoC is overestimated in a degraded battery; even at 5%
Intelligent BMS like Elysia can help OEMs to realise greater performance potential for batteries
SoC, it can be overestimated by as much as 10%, representing a direct risk to unexpected power loss. In a phone or laptop, such a state of health miscalculation can cause annoyance to the customer, but for a car the consequences could be much greater on the road. Testing has shown huge sensitivity
found between daily usage patterns (i.e. the typical window of utilised SoC) and the accuracy of the reported SoH. Even estimating the health from wide ranges, equivalent to charging to full from 10% SoC, may suffer from more than 5% SOH error. For most BMS systems, changes to the daily operating SoC window has significant sensitivity on reported SoH. We have seen that a driver starting the charge at 50% instead of 30% SoC has the effect of masking the majority of the capacity loss detected by the BMS, which leads to knock-on inaccuracies in range estimation.
THE NEED FOR INTELLIGENT SOFTWARE Battery Intelligence software, which combines state of the art data science, electrochemical modelling and AI can demystify the true state of the battery, with smarter interpretation of the data already being collected by existing sensors. By blending model-driven and data-driven approaches, it is possible to accurately predict what will happen to the battery state of health in the future, not just what degradation has occurred already. By understanding and forecasting
An intelligent BMS can allow OEMs to change charging and discharging behaviour of a battery
the future risks with a prognostic, rather than diagnostic approach, it is possible to predict non-linear degradation in a battery. This is termed a “knee point” where the
previously latent degradation becomes limiting to capacity. The impact of this is a change in the trajectory of the battery SoH, radically altering the lifespan of the vehicle. For an OEM with Battery
Intelligence software on the BMS, they can take action to change the charging and discharging behaviour of the battery to avoid the knee point that the battery would otherwise be destined for. For a fleet operator using cloud BMS software, it would instead be possible to change charging and usage behaviour, for instance by avoiding keeping the battery fully charged, changing charging strategies, or modifying usage patterns. For the fleet operator using cloud
software this new insight allows them to manage a large part of the value of its asset better. This can allow optimisation of fleet utilisation through allocating vehicles to duty cycles appropriate to their current SoH and compatible with achieving the target lifetime for the vehicle. It can also bring the possibility of financing vehicles over longer periods if battery state of health is going to remain at a level that is appropriate to their usage. For the OEM, using Battery
Intelligence software - both embedded and in the cloud - allows them to understand how batteries are really performing in use and make changes as necessary to improve safety, increase lifespan and unlock more performance, without changing anything physically in the battery design or manufacturing processes.
Tim Engstrom is the Manager – Advanced Battery Technologies at WAE.
www.wae.com
www.engineerlive.com 31
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
