POWERTRAIN


which are very complex systems that allow you to fill a vehicle very similar to the experience you would expect at a petrol station; a car can be filled in two to three minutes, while a truck can be filled in nine to 10 minutes.” Configured for optimum


performance based on the hydrogen inlet pressure, the company’s refuelling stations work by compressing hydrogen in various stages using its compression technology to increase the pressure and reduce the volume of the gas. This enables a more efficient flow of gas when dispensing. Then, a heat exchanger removes the excess heat from the gas that was generated during compression before the hydrogen is cooled to sub-zero temperatures. This optimises the fuelling experience, while vent lines are situated throughout the system to ensure the hydrogen can be removed safely during operation. Finally, the dispensing process regulates the flow of the gas to enable the direct dispensing of hydrogen through a nozzle into the vehicle at a controlled pressure and rate.


HESITANCY AROUND HYDROGEN Despite all the benefits that hydrogen promises, there is some negativity surrounding its use as a fuel for transportation, as Martin explains: “Historically, in this industry in particular, there has been quite a negative message around hydrogen, especially from older generations. This needs to change, and I think this transition is starting to happen. Engineers in particular see hydrogen as a molecule that is based on sound gas principles, like Boyle’s Law and the Joule-Thomson effect. The safety aspect is very important, as is the realisation that we’ve all already been sat on tanks of combustible fuel for years in the form of petrol and diesel vehicles, and hydrogen refuelling stations are actually much safer in terms of the refuelling process.” The hydrogen industry is also


subject to strict safety-driven standards and regulations in regards to temperature, refuelling protocols, and actual fill times. As part of the British Compressed Gas Association (BCGA), Haskel is supporting the further development


of these standards within the UK to promote safety in the use, storage, transportation and handling of hydrogen.


GROWING MOMENTUM Although the UK is lagging significantly behind the progress made by more renewable energy- positive countries like Australia and New Zealand - where Haskel has shipped a number of its refuelling stations already - in transitioning to hydrogen fuel, momentum in the industry is slowly gathering pace. “We have all the expertise in the


UK to do this,” Martin says. “But what we need to do is empower businesses to want to make hydrogen a solution and sit down with manufacturers and industry to show them how hydrogen can support our current infrastructure. Hydrogen is already beginning to be transitioned into the grid, which will make it even more palatable to invest in.” Looking ahead, what factors


might affect the ongoing transition to hydrogen fuel within the transportation sector? While we might not see hydrogen cars on our driveways anytime soon, Martin


believes the logistics sector will be where hydrogen really makes an impact over the next decade. “In particular, I see the transition


taking place for vehicles moving products around on a back-to-base basis, so anything that starts from one location and returns back to the same place,” he explains. “These could be measurable trips by trains, trucks, planes and so on, and aviation will certainly be a big focus. Fleet operators, such as large supermarket chains, that are delivering a large amount of product throughout the UK will likely transition to hydrogen, and Haskel is working with several of these companies now. “One of the most important aspects


of this transition will be educating people and businesses on how the refuelling stations work and can be integrated into their existing infrastructure and logistics strategies. Hydrogen is not the only answer, but it is a solution that will play a vital role in the journey to net-zero.”


For more information visit www.haskel.com


Hydrogen fuel cell


vehicles can be refuelled quickly and efficiently


www.engineerlive.com


9


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44