MATERIALS HANDLING
AT THE COAL FACE
Roger Willis details how a robust progressing cavity pump transports abrasive coal slurry from the coal face to the sump
A
t a coal mine in Eastern India, a mining company is using a progressing cavity pump for transporting coal slurry from
the coal face to the sump. Te unit is equipped with a gear motor that rotates at the right speed to keep the slurry suspended. At the same time, vibrations were minimised, which results in significantly less noise and wear. In addition, a stator made of nitrile rubber and a rotor made of chrome-plated tool steel were installed, ensuring a longer service life and reducing downtime caused by the difficult coal slurry medium. In a mine in Eastern India, mining the coal in the bank produces a lot of dust that then mixes with the gravitational water directly in the mining area and accumulates near the continuous mining machine. To ensure that the machine can move forward in the underground mine to cut the coal, the resulting slurry has to be removed from the working face.
Coal mining is a challenging application but the Netzsch pumps are proving they are up to the task
Tere was not enough space to install the pump in the bank area or near the sump, which created a high risk of dry running. In addition, the pump had a long suction line which resulted in a poor NPSHa value. Due to the long distance between the coal face and the sump, the pumps had to handle negative suction. It also had to be capable of reliably transporting the abrasive medium with fluctuating concentration, size and texture of the solids content.
The objective was to achieve better transport of the coal slurry, to ensure problem-free operation and to achieve a longer service life for the components
46
www.engineerlive.com
PUMP RELIABLY TRANSPORTS THE ABRASIVE MEDIUM Te company chose a Nemo pump from Netzsch that was adapted optimally to the application in the coal mine. Te pump is equipped with a stator with a 1L geometry that is driven by a gear motor and features a optimally sealing point, optimally fit of rotor and stator and robust connection options. Te materials chosen for the rotor and stator – nitrile rubber and chrome- plated tool steel – are particularly suitable for the abrasive medium. Furthermore, the pump is equipped with a gear motor that rotates at the right speed for keeping the slurry suspended, taking into account the speed in the pipe of more than 1.3m/ sec. Tis results in fewer vibrations and less noise, which further increases the service life of the pump. Tis was also the reason why the medium flow and pressure
A Nemo pump is used to transport coal slurry from the coal face to the sump
range were adapted to pumping coal slurry.
Te pump has been running in this mine since August 2018. Te owner has found that the pump is very effective at transporting the slurry compared to the previous model. Te increased service life of the components becomes evident from the fact that maintenance is now only required every eight to 10 months. Tis increased the service life by about 400%. After the first successful installation of a Netzsch pump for this application, the mining company decided to use additional pumps. Te progressing cavity pumps from Bavaria are now in use at more than 20 other sites.
Roger Willis is with Netzsch
www.netzsch.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
