MATERIALS HANDLING
momentarily, until the upstand catches and drags the item away and out of the magnetic fi eld.
HEAVY-DUTY ARMOUR Applications in which self-
cleaning belts experience high levels Bunting’s permanent
overband magnet with an armoured belt
ARMOUR ADVANTAGES
Paul Fears delves into the benefi ts of incorporating an overband magnet into conveyor belt systems within mining operations
T
he highest wear part on an overband magnet is the belt that transfers the separated metal away from
the conveyor and into a collection area. In order to reduce such wear, Bunting has developed a special lightweight armouring for the rubber belt. Bunting is a designer and
manufacturer of magnetic separators, eddy current separators, metal detectors and electrostatic separators. The Bunting European manufacturing facilities are in Redditch, outside Birmingham, and Berkhamsted, both in the UK.
In operation, an overband magnet
sits over a conveyor transporting materials such as aggregate, waste, shredded wood or mined ore. The magnetic fi eld of the overband magnet, generated by either a permanent magnet or an electromagnetic block, attracts ferrous metal from the conveyed material up and onto the revolving self-cleaning belt. Rubber upstands on the belt catch the lifted metal, transporting it away from the conveyed material into a separate collection area. The force of the
ferrous metal striking against the self-cleaning rubber belt is signifi cant due to the magnetic attractive energy of the permanent or electromagnetic block increasing as the metal moves closer to the face. This means that the metal is accelerating into the belt. The moving belt becomes sandwiched between the lifted metal and the magnetic block
52
www.engineerlive.com
of wear include when there are high amounts of ferrous metal present in the conveyed material, when the ferrous metal is large and heavy, when there are nails or thin and sharp ferrous metals, and when the magnetic block has additional magnetic force, as with the ElectroMax and ElectroMax-Plus models. To combat the excessive wear and
extend the life of a self-cleaning belt, Bunting’s engineers have designed a lightweight but heavy-duty armouring for the belt. There were other options, including special wear-resistant belt coatings and other types of rubber belt. However, the armouring provided unrivalled protection, signifi cantly lengthening belt life. The armouring on the rubber belt is
comprised of high-density polyethylene (HDPE) slats. Each slat is 100mm wide and 10mm thick, with a length to suit the model of overband magnet. The slats are fastened to the belt using special 304 stainless steel elevator bucket bolts and nyloc nuts. “The introduction of this design
of armoured belt has proven very popular,” explains Adrian Coleman, Bunting’s technical director. “Other types of belt armouring have proven unsuccessful, but the HDPE has worked exceptionally well.” ●
Paul Fears is with Bunting.
www.bunting-redditch.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56
