COMPOSITES
SOLAR SAIL SYSTEM
Advanced composite solution: using sunlight to power deep space exploration
This is the first use of composite booms for a solar sail in orbit
N
ASA is developing new deployable structures and materials technologies for solar sail propulsion systems destined for
future low-cost deep space missions. Just as a sailboat is powered by wind in a sail, solar sails employ the pressure of sunlight for propulsion, eliminating the need for conventional rocket propellant. NASA’s Advanced Composite Solar Sail System, or ACS3, mission uses composite materials – or a combination of materials with different properties, in its novel, lightweight booms that deploy from a CubeSat. Data obtained from the ACS3 mission will guide the design of future larger-scale composite solar sail systems that could be used for space weather early warning satellites, near- Earth asteroid reconnaissance missions, or communications relays for crewed exploration missions.
Te composite materials boast light
weight, flexibility, and rigidity: qualities that make them easily stowable and also less prone to bending when heated by the sun.
MISSION OBJECTIVES Te primary objective of the ACS3 mission is to demonstrate the successful deployment of the composite boom solar sail in low- Earth orbit. After reaching space, the mission’s CubeSat spacecraft will deploy its solar power arrays and then begin unfurling its solar sail via four booms that span the diagonals of the square and unspool to
36
www.engineerlive.com
reach 7m in length. After approximately 20 or 30 minutes when the solar sail is fully deployed, the square-shaped solar sail measures approximately 9m per side (or about the size of a small apartment). A suite of onboard digital cameras will obtain images of the sail during and after deployment to assess its shape and alignment. Te ACS3 mission’s sails are supported and connected to the spacecraft by booms, which function much like a sailboat’s boom that connects to its mast and keeps the sail taut. Te composite booms are made from a polymer material that is flexible and reinforced with carbon fibre. Tis composite material can be rolled for compact stowage but remains strong and lightweight when unrolled. It is also very stiff and resistant to bending and warping due to changes in temperature. Solar sails can operate indefinitely, limited only by the space environment durability of the
solar sail materials and spacecraft electronic systems. Te ASC3 mission will also test an innovative tape-spool boom extraction system designed to minimise jamming of the coiled booms during deployment. Interest in solar sailing as an alternative to chemical and electric propulsion systems continues to increase. Using sunlight to propel small spacecraft in lieu of consumable propellants will be advantageous for many mission profiles and offers flexibility in spacecraft design to help NASA meet its missions’ objectives most efficiently.
Tis is the first use of composite booms
as well as sail packing and deployment systems for a solar sail in orbit. Tese composite booms are 75% lighter and experience 100 times less in-space thermal distortion – change of shape under heat – than previously flown metallic deployable booms.
Te solar sail is designed to fit inside a 12-unit (12U) CubeSat, which measures approximately 23cm x 23cm x 34cm, or slightly larger than a toaster oven. Te composite boom technology used for this ACS3 mission can be used in future missions for solar sails up to 500m3 – about the size of a basketball court. Follow-on composite boom technologies now in development will enable solar sails as large as 2,000m2
. Te ACS3 mission
The solar sail’s unfurling process takes between 20 and 30 minutes to complete
is scheduled to launch no earlier than mid-2022.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
