INSTRUMENTATION • ELECTRONICS
MPL offers a variety of products that can be customised
ELECTRONICS DESIGN I
REINVENTING
Rapid prototyping to meet time-to-market. Remy Lörtscher on the cost-optimised customisation of embedded solutions
n today’s fast-living era, time-to-market is a crucial and important decision factor between success or failure. Increasing functionality and high
quality requirements lead to more complex embedded hardware and software. Tis drives up the development effort (time and money). Te fact, however, is that we get less and less time, money and personnel. Especially in more complex applications such as defence, railways or maritime, prototypes are inevitable. To design a final product can be costly and most of the time, the first prototype is not the last prototype. NRE costs are not freely available.
WHAT CAN BE DONE? Ideally the same electronics and functionality can be tested in the lab in a
standard packaging without costly custom housing or specific connectors of a final prototype.
MPL has developed and successfully
commercialised this approach over the past few years. Since 1985, MPL has been developing and manufacturing embedded systems and solutions in computing and network for tough environments, the highest reliability requirements and with long-term availability. Over the time, the application areas have broadened; it’s the same electronics but each application area uses or needs different packaging and connectors. An important know-how of MPL is the capability of customisation for a standard product to the specific needs and flexibility.
MPL’s advanced prototyping solution 22
www.engineerlive.com
THE PROCESS A customer tests MPL’s solution (embedded computer board, embedded server, switch, firewall, etc) from the standard product portfolio to verify the functionality and feasibility. Te standard solutions are generally available from stock, therefore a test can start immediately. During the feasibility check, a customer often sees that additional requests that should be developed. Tis can be specific connectors,
integration of additional features or footprint limitations. With this procedure, the costs as well as the necessary time can be reduced to a bare minimum. Time-to-market is being optimised. Te customer benefits from the experience of the company’s products and integration knowledge and gets his own specifications in the standard product. Te company has many customisation examples of a standard product. It can be the functionality of the product or simply the packaging or type of connectors. With this process, the capability and
procedure, the costs and development time, is reduced to a minimum. Te first prototype is electrically and functionally equivalent to the final product. Te customer meets his functional specification already in the lab product.
A WAY OUT OF THE COST AND TIME DILEMMA With the functional prototype, the requirements from the user’s point of view are clarified and the most critical design decisions are secured. Te core task of the prototype is then fulfilled and the actual development can begin in parallel during the verification process. Te word ‘rapid’ in prototyping plays a special role because different variants can be implemented quickly, and anything that’s unclear can be resolved immediately.
Remy Lörtscher is CEO of MPL.
www.mpl.ch
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
