CERTIFIED CEMS & PROCESS ANALYSERS EMISSIONS & PROCESS MONITORING
MCS100FT CEMS: Continuous emissions monitoring of all pollutant components in exhaust gases
With the MCS100FT, SICK off ers an FTIR analyzer system that provides complete, continuous emissions monitoring. It detects more than 12 measuring components simultaneously, such as HF, HCl, SO2, NO, NO2, CO, NH3, N2O, CH4, and Corg (VOC). The MCS100FT enables HF limit values to be monitored in accordance with legal requirements. It is equipped with an oxygen sensor as standard and can be supplemented with an integrated total hydrocarbon analyzer (FID).
MCS200HW multi-component analyzer system: Measurement of components in fl ue gases of industrial combustion plants
The all new MCS200HW is the replacement for the hugely successful MCS100E HW, This Hot, wet extractive system is capable of measuring up to 10 components and can also include an O2 measurement as well as an integrated VOC analyser. With a new web display and operating system and integrated calibration cells the MCS200HW is another industry leading CEMS from SICK.
MERCEM300Z extractive gas analyzer: Monitoring mercury in emissions
The MERCEM300Z extractive gas analyzer has one of the smallest certifi ed measuring range of all measuring systems suitability tested in accordance with EN 15267-3, with a range from 0 to 10 μg/m³ total mercury content. It is also suitable for continuously monitoring the annual threshold of 10 μg/m³. The greatest advantage of the MERCEM300Z is that it transforms oxidized mercury into elemental mercury without the addition of chemicals or converters. This signifi cantly reduces the amount of maintenance required in comparison to all other measuring systems.
Combiprobe CP100 CEMS solution: Space-saving solution for measuring dust, fl ow, pressure, and temperature
With the CP100 combiprobe, dust, fl ow, pressure, and temperature can be measured in the stack with minimal use of space. This solution involves installing a DUSTHUNTER SP100 (scattered light method), a FLOWSIC100 PR (ultrasonic measuring principle as a probe), and a PT100 temperature sensor and pressure sensor on a combination fl ange (DN250 PN6). This renders additional couplings or fl anges unnecessary. This space- saving solution especially proves its worth where redundant design of the measuring devices is required.
MCS300P HW process solution: Process measurement at fl ue gas scrubber inlets
In the fl ue gas scrubber, among others, HCI and SO2 are reduced with reagents. Activated carbon is added for mercury removal. The MCS300P HW simultaneously measures the SO2, HCI, H2O, and optionally the O2. The MCS300P is an extractive process photometer which can measure gaseous or liquid media. It measures IR and VIS active components with variable measuring ranges available, capable of automatic sample point switch and an integrated adjustment unit the MCS300P also has fl exible I/O capabilities for interfacing with the plants DCS.
www.sick.co.uk |
info@sick.co.uk | +44(0)1727 831121 3
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
