Laboratory Products ix Best practices in sample preparation of baby food for trace metal determination


Food is the fuel for life and our health depends on what foods we eat and also what foods we do not eat. Foods are complex materials containing proteins, fats, carbohydrates, and minerals. Within these there are several elements we need in high amounts such as calcium and sodium, several that are essential that we need in smaller quantities such as manganese and selenium, and others that we must not ingest such as lead and mercury. Eliminating the latter group of elements is critical for the health of adults and even more critical for the health of infants.


Guidance and regulation of toxic heavy metals in foods is driving permissible levels ever lower and the FDA is working on a ‘closer to zero’ plan however we must be able to accurately measure these low levels. The method of choice for meeting these new analytical demands is ICP-MS however the sample preparation must be considered a fundamental step for obtaining accurate and precise results. This includes purity of reagents, contamination from laboratory materials (including the analyst), and sample preparation procedures.


A Milestone e-book download is available from Analytix that provides an introduction to best practices for clean strategies and microwave assisted sample preparation tailored for a ‘closer to zero’ plan in baby food analysis.


The clean strategies section considers the role of costly highly purified acids, the mechanism of making them in-house from low-cost reagents, and the obtainable levels of trace metal contamination from using this process. Also discussed is the cleaning of parts and ancillary pieces that come into contact with baby food samples when determining trace elements such as As, Cd, Pb, and Hg.


The sample preparation section discusses the use of two closed vessel microwave digestion systems and provides data where LOQs were reduced by increasing sample weight coupled with a lower dilution factor with complete digestion under those conditions. The total sample workflow demonstrated will enable laboratories to measure levels at future proposed action limits where current ICP-MS systems would struggle without the discussed changes to sample preparation methodologies.


Contact Analytix for a free copy of the e-book. More information online: ilmt.co/PL/ZbNQ


62560pr@reply-direct.com


Reduce laboratory ashing times by up to 95% - minutes instead of hours using standard crucibles


Standard ashing, sulphated ashing, LOI/ROI, small and large scale ashing all in a single platform


ASHING


Fully compliant with ASTM, ISO, IP, AOAC, and USP methods


UltraFAST heating module - up to 1000°C in 8 minutes with inert gas option


TEL: 0844 800 4220 EMAIL: sales@analytix.co.uk WEBSITE: www.analytix.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94