ii UK FOCUS Digital rate & total indicator


The Pulsite Solo from Titan Enterprises is a low cost, digital rate and total display indicator that is adaptable to suit almost any fl ow and rate measurement application across the manufacturing sector.


Requiring no external power, the compact Pulsite Solo has multiple mounting possibilities and can be confi gured to any fl ow element. Programming on the Pulsite Solo is quick and simple using just the two front panel keys and following the prompts on the LCD display.


Battery powered and designed to indicate a variety of pulse input, such as coil, reed switch and logic, the Pulsite Solo will take frequencies up to 2 KHz and scale them to display rate or total. The scaling factors are adjustable from 0.01 to 9999 and the time base is selectable as seconds, minutes or hours. This versatile indicator can also be externally dc powered if required for use with electronic sensors.


Available as a panel and surface mounted unit, the IP64 compliant Pulsite Solo is a reliable and long-term display unit proven across a wide range of operating environments. When solely powered by the replaceable battery, the Pulsite Solo can operate in excess of 5 years when used as a fl ow totaliser. As a digital fl ow rate measuring instrument, the battery life of the Pulsite Solo depends on the duty cycle but will still provide several years of operation.


For further information on the Pulsite Solo digital fl ow rate and total indicator please visit https://www.ratetotaliser.com/ or contact Titan Enterprises on +44 1935 812790 or sales@fl owmeter.com.


Drawing upon over 40-years of fl owmeter innovation - Titan Enterprises Ltd is a manufacturer of high-performance solutions including the Atrato ultrasonic fl owmeter, Oval Gear fl owmeters, low fl ow Turbine fl ow meters and a fl ow instrument range. Titan’s company philosophy of “pushing the envelope by trying to do things a little different and better” has resulted in sales of over 500,000 products into 50 countries worldwide and a repeat purchase percentage of 95%. All fl owmeters produced by Titan Enterprises are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.


More information online: ilmt.co/PL/WjEM For More Info, email:


Reliable and cost effective noise monitoring solution for indoor and outdoor applications


MESCO have developed a small unobtrusive Environmental Monitoring Solution around their Listen Ear noise monitoring product. Mounted in a small ‘Peli®


microphone, the total measurements of this unit are only 120 x 190mm and it weighs just 260g. With a battery life of 160 hours plus this unit will data log at 1 second intervals for up to 144 hours. Data download is achieved via a USB cable to a PC in a spread sheet format (see below) and can display not only Sound Level readings but Temperature and Humidity data as well.


email: For More Info, email: email:


Start date 23/06/2020 T(h:m:s)


11:25:48 11:26:18 11:26:48 11:27:18 11:27:48 11:28:18 11:28:48 11:29:18 11:29:48


Duration 05:30:19


64.4


50.1 48.2 44.1 61.5 40


84.7 42.5


Interval (s) 30


0 0


0.1 0.1 0.1 0.1 0.2 0.3 0.4


Records 662


Las(dB) Dose #1(%) Dose proj. #1(%)


- - - - - - - - -


Leq #1(dB) Temp(‘C) Hum(%RH)


50.55 51.5


54.53 54.51 54.64 54.69 56.03 58.43 59.39


28.1 28.1 28.1 28 28 28


28.1 28.1 28.3


51.9 51.9 51.9 51.9 51.9 51.9 51.9 51.9 51.4


Ideal for Fence Line monitoring or anywhere where discrete noise monitoring is required indoors or outdoors. This is an effective and low cost Health & Safety solution.


MESCO offer many other Health & Safety monitoring and measuring solutions. More information online: ilmt.co/PL/QLrB


For More Info, email: email:


For More Info, email: email:


52722pr@reply-direct.com


ENVIRONMENTAL NOISE MONITORING & NOISE DOSIMETRY - 144 Hour Continuous Data Logging - Download via USB to PC - UNOBTRUSIVE - EASY TO SET UP - EASY TO MOUNT - ALL WEATHER


From £ 299 + VAT


MESC MEASURING EQUIPMENT SOLUTIONS LTD www.mesco.uk


SALES - SERVICE - SUPPORT for worldwide products in the UK & Eire


’ Style waterproof case with an external 54025pr@reply-direct.com


Professionally distanced: Ensuring employee safety through remote


monitoring and social distancing With the focus for many businesses dealing with the ongoing Covid-19 global health crisis beginning to shift to ‘the new normal’ and returning to the workplace, questions are being asked by employees and employers alike around how workplaces will be made, and kept, safe. According to a poll of US employees, 54% shared concerns about exposure to Covid-19 in the workplace. Employers can take assurance, however, in the fact that 71% of those polled have confi dence that their employers can bring them back to work safely.[1]


Covid-19 is a health hazard that will necessitate new ways of working for some time to come, with one of the primary methods to limit the spread of the virus being maintaining social distancing of at least 6 feet (2m) between people.[2] While Covid-19 is a primary concern, and must be consistently monitored in all workplaces, it does not mean that the ‘old’ hazards of many workplace environments have disappeared. When reintroduced into workplaces, it is essential that employers and employees continue to observe monitoring procedures for other risks to health, including noise, dust and vapour hazards. Technological advancements in monitoring methods for these hazards have presented unintended possibilities for aiding in the fi ght against Covid-19 – namely, personal monitoring equipment where measurements can be started, and the data checked remotely without disturbing the wearer. It is important that employers establish protocols that allow workers to minimise close contact and ensure social distancing throughout a shift as much as is possible, while continuing hazard monitoring with minimal disruption to either procedure. Whether individual workplaces will be adapting social distancing into existing workfl ows, or changing workfl ows to introduce social distancing measures, fl exibility of monitoring equipment will make either approach much easier to integrate.


Casella have a range of body-worn monitoring equipment, such as the dBadge2 noise dosimeter or Apex2 and VAPex personal sampling pumps, which allow individual units to be issued to employees in a controlled way; collected from a demarked area at the start of a shift that allows a restricted number of employees in and out at any one time, maintaining a social distance. This method can then be used for employees to deposit units at the end of a shift, ready for thorough cleaning and disinfection. Once equipment has been issued, real- time results can be checked remotely throughout the day. Connectivity is key; advancements such as integrated Bluetooth connections allow dosimeters and pumps to accessed remotely up to a distance of 25m away (over 12 times the suggested social distancing minimum of 2m). This minimises both worker disruption during a working day and potential close contact levels, increasing peace of mind for employees and employers alike.


As well as real-time data such as battery charge level, fl ow rate, run time and volume sampled, safety managers are able to capture full, accurate reports of a monitored period and download these reports remotely via App connectivity, with examples including the Casella AirWave app. With the ability to overview and download data from multiple devices, managers are given a clear picture of hazards across the workplace without having to interact with monitoring units (and the employees wearing them) directly. Utilising the app in conjunction with a sampling pump and an air fl ow calibrator, like the Casella Flow Detective, allows users to calibrate monitoring devices and check results remotely, giving confi dence in results and minimising physical interactions from the start of sampling to completion.


“When designing our personal monitoring devices, including the dBadge2 dosimeter range and the VAPex and Apex2 sampling pumps, we included remote monitoring advancements like App connectivity and integrated Bluetooth to address the challenges employers and employees faced with workplace hazard monitoring at that time,” explains Tim Turney, Casella’s global marketing manager.


“We couldn’t have predicted the challenges that Covid-19 would bring to those making workplaces safe, but through prioritising fl exibility and user-focused features as part of our designs alongside safety, we’ve given users the ability to adapt to socially distanced working and for personal exposure monitoring to continue for these traditional workplace hazards.”


More information online: ilmt.co/PL/ZJl4 For More Info, email:


IET JANUARY / FEBRUARY 2021 WWW.ENVIROTECH-ONLINE.COM


email: For More Info, email:


52555pr@reply-direct.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48