WATCH BRACELET & STRAP ADJUSTING
Watch Bezel & Case Back Remover, Horotec
• Tool to open snap on watch case backs or to remove turning bezels
• Equipped with a screw to stabilise the table at the desired height
• Can be screwed securely to your work bench (screws not supplied)
• Has 4 ridged rubber feet for stability • Bezel removing jaws available separately, our code C52364
• Swiss made • Horotec MSA 07.119
1. The watch is placed upside down on the height’s adjustable green rubber sprung loaded support mount.
2. The action can be made by 2 blades placed opposite to each other or by one blade and the white delrin die placed to opposite.
3. The white delrin die has a hole Ø10mm to place the watch crown inside, holding the case steady
Horotec Swiss - up to Ø45mm
• Can remove bezels and case backs up to Ø45mm • Tool to open snap on watch case backs or to remove turning bezels
• Can be screwed securely to your work bench (screws not supplied)
• Bezel removing jaws available separately, our code C52364
• Swiss made • Horotec MSA 07.115
1. The watch is placed upside down on the height’s adjustable green rubber sprung loaded support mount.
2. The action can be made by 2 blades placed opposite to each other or by one blade and the white delrin die placed to opposite.
3. The white delrin die has a hole Ø10mm to place the watch crown inside, holding the case steady
Supplied with: • 2 blades, width 2mm • 2 blades, width 4mm • 1 case supporting delrin die • Pin holder • Assortment of 11 pins: Ø0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50 & 2.00mm • Pin to remove blades
Interchangeable Spare Parts: • C31508 (07.115-A): one blade only width 2mm • C31509 (07.115-B): one blade only width 4mm • C31510 (07.115-C): delrin die
• C31511 (07.115-D): pin for removing blades Code
Description
C31480 C31508
C31509 C31510 C31511
Bezel Removing & Case Opening Tool, Horotec
2mm Blade, Horotec 4mm Blade, Horotec Delrin Die, Horotec
UOM Price
EACH £189.50 EACH £17.45
Pin for Removing Blades, Horotec EACH Price breaks available, see website
EACH £15.50 EACH £11.95 £1.25
Horotec Swiss - Bezel Removing Jaws
Adapter for the safe removal of tight rotating watch bezels, divers type and for Rolex generics and other generic brands.
Watch Bezel & Case Back Remover, Horotec Extra Large
• 4 tempered & polished stainless steel blades • Precise finish and alignment • Spare blade available, our code B44245 • Fit directly onto our codes C31480 & C45771 • Perfect for removing bezels delicately • Maximum opening Ø40mm • Horotec 07.115.F
Code C52364 Description
Bezel Jaws for Bezel & Case Back Remover
UOM Price EACH £94.50
Supplied with: • 2 blades, width 2mm • 2 blades, width 4mm • 1 case supporting delrin die • Pin holder • Assortment of 11 pins: Ø0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50 & 2.00mm • Pin to remove blades
Interchangeable Spare Parts: • C31508 (07.115-A): one blade only width 2mm • C31509 (07.115-B): one blade only width 4mm • C31510 (07.115-C): delrin die
• C31511 (07.115-D): pin for removing blades Code
Description C45771
Bezel Removing & Case Opening Tool, Extra Large
UOM Price EACH £315.00
For the adjustment and removal of bracelet pins and screws. We have a large range and several types of pin removing tools available along with bladed pin tools (screwdriver straight & crosshead ends) accessories for removing screws.
• Straightforward and easy to use, simply choose the correct size pin for your watch bracelet pins and either lightly hammer out, push out or gently screw the pusher pin in to push the bracelet pin out.
• These tools are used for the most common type of bracelet pin you will encounter
• If using free pins, it is best to use a bracelet holding block, see our “bracelet holding blocks” section for a full range
Base, Block & Pins, Bergeon 7744
Bezel Jaws for Bezel & Case Back Remover, Horotec
WATCH BRACELET & STRAP ADJUSTING
BRACELET ADJUSTING TOOLS
• Tool to drive out bracelet pins complete with accessories
• With enough space to enable the ejection of the pins • Ergonomic, professional style
Contents: • 2 x bracelet holders (B0153) • Wooden base (B8580) • 1 pin holder (B0163) • 6 pins: Ø0.40, 0.60, 0.80, 1.00, 1.50 & 2.00mm (replacements available see code B6686)
Code B42020 Description
Bracelet Adjusting Tool, Bergeon 7744
Base, Block & Pins, Cousins Swiss Style
UOM Price EACH £54.75
Bezel & Snap On Case Back Remover
Horotec Swiss - Extra Large - up to Ø60mm • Can remove bezels and case backs up to Ø60mm
1076 See Page 1099
Bracelet Pin Remover - Base, Blocks & Pins - Cousins Swiss Style
• Link pin remover set • Comprehensive selection of sizes • Presented and stored on a wooden base • Stainless steel • 6 different size pins included
COUSINS TRADE SUPPLIER
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112
