WATCH CASE & WATCH GLASS TOOLS Clamps for Open Ended Straps
CASE OPENING - BAUME & MERCIER
Baume & Mercier Dies with Holder, Non Swiss
Universal Fitting Dies for Tools: • Bergeon Swiss • Horotec Swiss • Swiss Style
Fitting: • Universal = dies fit directly on to the tools • Universal with Adapter = dies fit on to the tools usint adaptor C0318
• Clamps the open ended straps in place to allow the adhesive to set
• Can be used with straps up to 28mm wide • Protective felt pads wont damage the strap • Felt pads: 22 x 28mm • Overall size: 55 x 25 x 25 (L x W x H) • An essential addition to your toolbox
• Pack*2 Code
S45541 Description Clamps for Open Ended Straps
UOM Price PACK*2
Baume & Mercier Dies, Horotec, Universal
Universal Fitting Dies for Tools: • Bergeon Swiss • Horotec Swiss • Swiss Style
£3.95
Fitting: • Universal = dies fit directly on to the tools
GLASS TOOLS Watch Case Back Removing:
More and more watches these days come with a screw on case back. These feature small depressions spaced around the edge of the case back, designed to provide a gripping point for the use of a wrench case opener. Knowing how to use one of these screw type case openers properly will prevent you from damaging the watch.
How to use:
1. Place the wrist watch face down in a protective watch holder. 2. Having picked the correct shaped tool bits (by matching them to the indentations on the case) or die for the case you are about to work on, insert them firmly into the screwback tool. 3. Adjust the width of the bits on the tool to match the size of the screw down case back on the watch. 4. Matching up the tool bits and the indentations on the case back, apply firm downward pressure, hold the watch or watch holder and turn the wrench to loosen the back. If using a benchtop tool the same princple applies.
WATCH CASE & WATCH
Dimensions are the outside edge of the teeth diameter.
Code
C30934 C30935 C30936
Description UOM Price
Ø25mm (B&M), Horotec, Universal EACH £34.95 Ø30mm (B&M), Horotec, Universal EACH £34.95 Ø30mm (B&M), Horotec, Universal EACH £34.95
Baume & Mercier Dies with Holder, A*F Swiss
CASE OPENING - BREITLING
Universal Fitting Dies for Tools: • Bergeon Swiss • Horotec Swiss • Swiss Style
Fitting: • Universal = dies fit directly on to the tools • Universal with Adapter = dies fit on to the tools using adaptor C0318
Breitling Dies (Universal), A*F Swiss
• Three different diameter dies, inside diameters: Ø21, 26 & 29mm
• Die holder • Specifically for Baume & Mercier watches
Supplied with a Die Holder & 3 dies (Ø21, 26 & 29mm) for Baume & Mercier case backs. These dies will only specifically fit the tool handle supplied in this set.
Dimensions are the outside edge of the teeth diameter. Code
Description B37141 Baume and Mercier Opener
UOM Price EACH £19.95
A*F Swiss - Case Back Opening Tools
A*F 167.781 (C9577) is supplied with a Die Holder & 3 dies (Ø21, 26 & 29mm) for Baume & Mercier case backs. The dies will also fit any of our universal case back tools listed below. Dimensions are the outside edge of the teeth diameter.
Universal Fitting Dies for Tools: • Bergeon Swiss • Horotec Swiss • Swiss Style
Watch Strap Keepers
See Page 630
Fitting: • Universal = dies fit directly on to the tools
Code C9577 Description
A*F 167.781 Baume & Mercier Opening Tool
UOM Price EACH £184.75 A*F Swiss - 18 piece Set
Universal Fitting Dies for Tools: • Bergeon Swiss • Horotec Swiss • Swiss Style
Fitting: Universal with Adapter = dies fit on to the tools using adaptor C0318 or C39846. Superb quality, exact sizes to avoid damaging case backs.
Die inside diameters, all with 15 edges unless stated: • Ø19.00mm (No.1) - 13 edges • Ø23.50mm (No.2) - 13 edges
1090 COUSINS TRADE SUPPLIER
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112
