search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
JEWELLERYY SOLDERING, NG, MELTING & PITING &


Sievert Hose & Hose Parts (All Systems)


Sievert Hose & Hose Parts


WELLER SOLDERING, HEATI HEATING, MELCKLING PICKLING


Sievert Regulators & Hose Failure Valves (All Systems)


Sievert regulators are made of brass to ensure high quality and a long life time.


• The technical precision of these nozzles gives excellent gas flow rating and outlet pressure


• We stock multiple fitting types of regulator, either POL or BSP


• These are standard LPG (gas cylinder) connections. Check with your local LPG supplier, often they will fit the regulator for you


• Hoses & hose spare parts, regulators & hose failure safety valves can be used with any Sievert system (Promatic or Pro86/88)


Sievert Hose & Hose Parts


• Cousins supply ready made hosing with sealed Sievert factory seals


• We also supply plain hosing fittings which are sold separately


• Plain Sievert hosing can be fitted with ease, allowing your preferred hose length


• Please note: Do not exceed eight meters of hosing; the torch will not light


• Hoses & hose spare parts, regulators & hose failure safety valves can be used with any Sievert system (Promatic or Pro86/88)


Some simple steps to assemble Sievert hosing: 1. Cut the hosing to your desired length (sold in one meter lengths)


2. Fit two of the Sievert Hose Nipple Fitting Clamp (B0099), to fit place the hosing in boiling hot water, this will expand the hosing


3. Put a little bit of washing up liquid on the nipple end (Sievert Hose Nipple, B0098) this will easily push the nipple onto the hosing


4. Repeat this process on the other end and move the hose nipples clamps over the bottom nipple end and tighten the hose fitting clamp with a pair of pliers; pressing the jaws on the recess part of the hose clip


5. The hosing is ready to use.


Specifications: • B0097 per metre, supplied cut to your required length (fittings required B0098 & B0099)


• Approved rubber hose for propane or butane. • Inner Ø5mm • Connection threads BSP 3/8” LH - BSP 3/8” LH. • 2 & 4m pre-cut lengths supplied with fittings


• Sievert hoses conform to EN 559/ISO 3821 standards Code


Description B0097 B0095 B0096 B52131 B0098 S50362 B52125 B0099


Sievert Hose per meter (cut to length)


Sievert 2 meter Hose (7173-21) with Fittings


Sievert 4 meter Hose (7173-41) with Fittings


Sievert High Pressure 3 Metre Hose (7700.31) with Fittings


Sievert Hose Nipple (Ø5mm), Fixed (7096-21)


Sievert Hose Nipple (Ø5mm), Swivel (7220.01)


Sievert Hose Nipple (Ø5 & Ø8mm), Swivel (7173.31)


Sievert Hose Nipple Fitting Clamp (7006GER)


UOM Price


1 Metre 2


£2.50


METRES £22.50 4


METRES £32.50 3


EACH


METRES £19.95 £4.75


EACH EACH EACH £8.95 £8.95 £0.50


Most Sievert burners require a steady pressure of at least 2 bar in order to perform well and most can operate at higher pressures. Even under higher pressures it is still an advantage to reduce the pressure from the propane cylinder.


The advantage is that the pressure can be stabilized to obtain the same pressure on a warm summer’s day as on a cold winter ´s day. If the gas output is high, the gas cylinder will be cooled down and the pressure will drop.


• Set the pressure with adjustable regulators and have better control over the heating applications


• Various burner/nozzles work on different pressures 2 or 4 bar, depending on the nozzle (Please see individual burner information)


• Can be used with a hose failure safety valve • Fits a cylinder with a POL Connection • Genuine Sievert products


Hoses & hose spare parts, regulators & hose failure safety valves can be used with any Sievert system


(Promatic or Pro86/88) Code


B0092 B33068 Description


Sievert 3061.11 (1 to 4 bar) POL Connection


Nova Comet (2 to 4 bar) POL Connection


UOM Price EACH £69.95 EACH £19.15


Most Sievert burners require a steady pressure of at least 2 bar in order to perform well. Other burners can also operate under higher pressures but it is still an advantage to reduce the pressure from the propane cylinder.


The advantage is that the pressure can be stabilized to obtain the same pressure on a warm summer ´s day as on a cold winter ´s day. If the gas output is high, the gas cylinder will be cooled down and the pressure will drop.


• 2 or 4 bar regulators • Fits a cylinder with a POL Connection • Genuine Sievert products


Hoses & hose spare parts, regulators & hose failure safety valves can be used with any Sievert system


(Promatic or Pro86/88) Code


B0093 B0093A 896 COUSINS TRADE SUPPLIER Description


Sievert 3091.21 (2 bar - 6kg/h) POL Connection


Sievert 3091.91 (4 bar - 20kg/h) POL Connection


UOM Price EACH £34.95 EACH £42.95 Sievert Adjustable Regulators


Please note ‘g/h’ denotes the maximum capacity of gas that is used per hour. This also depends on the burner and nozzle sizes you are using. The measurements below are calculated on the regulator outputting LPG without any burner/nozzles attached.


See the ‘Sievert Neck Tubes & High Precision / Capacity Burners’ for working times and gas usage capacity.


Most Sievert burners require a steady pressure of at least 2 bar in order to perform well and most can operate at higher pressures. Even under higher pressures it is still an advantage to reduce the pressure from the propane cylinder.


The advantage is that the pressure can be stabilized to obtain the same pressure on a warm summer’s day as on a cold winter ´s day. If the gas output is high, the gas cylinder will be cooled down and the pressure will drop.


Why use a hose failure valve? A hose failure valve improves safety by cutting off the gas flow in case of a hose rupture or some other major gas leak. The use of hose failure valves is especially recommended on long hoses. The hose connection rotate freely on the valve housing, which reduces the risk of the hose becoming entangled.


• Set the pressure with adjustable regulators and have better control over the heating applications


• Various burner/nozzles work on different pressures 2 or 4 bar, depending on the nozzle (Please see individual burner information)


• Fits a cylinder with a POL Connection • Integrated hose failure safety valve • Genuine Sievert products


Hoses & hose spare parts, regulators & hose failure safety valves can be used with any Sievert system


(Promatic or Pro86/88) Code


B6191 Description


Sievert 3063.11 (1 to 4 bar) POL Connection


UOM Price EACH £103.95


Sievert Adjustable Regulators with Hose Failure Safety Valve


Sievert Fixed Regulators


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102