HAMMERS & MALLETS
• Overall length 255mm • Head length 55mm • Head diameter Ø25mm • Surfaces on these Indian made items may not be as well finished as the more expensive hammers
Code H36260 Description 5oz, Ø25 x 55 x 255mm 5oz, Ø28 x 60 x 260mm
UOM EACH
Price £3.95
• Weight 4oz • Length overall 330mm • Head length 100mm • Round head Ø15mm • Domed chisel width 16mm
Weight 5oz • Overall length 260mm • Head length 60mm • Head diameter 28mm
Code H19527 Description 5oz, Ø28 x 60 x 260mm 6oz, Ø32 x 67 x 260mm
UOM EACH
Price £7.25
Dimensions: Weight x Overall Length x Head Length x Head Ø
Code H5106 Description
4oz (330 x 100 x 15mm) Cross Pein, Faithful
UOM EACH Price £8.95 Dimensions:
Head Shapes x Overall Length x Head Length x Head Size • Overall length 265mm • Head length 90mm • Head diameter 16mm
Code 8oz (260 x 85 x 23mm) Cross Pein H31922 Description Hex/Chisel (265 x 90 x 16mm)
UOM EACH
Price £5.75
Round/Chisel (265 x 90 x 18mm)
4oz (330 x 100 x 15mm) Cross Pein, Faithful
• Head diameter 16mm Code
Description H31923 Hex/Hex (265 x 90 x 16mm)
UOM EACH
Hex/Chisel (265 x 90 x 16mm)
Price £4.95
Weight 6oz • Overall length 260mm • Head length 67mm • Head diameter 32mm
Code H19528 Description 6oz, Ø32 x 67 x 260mm
UOM EACH
7oz, Ø25 x 65 x 260mm, Domed Face
Price £7.50
• Weight 4oz • Length overall 260mm • Head length 85mm • Round head Ø23mm • Domed chisel width 16mm
Dimensions: Weight x Overall Length x Head Length x Head Ø
Code H39465 Description
8oz (260 x 85 x 23mm) Cross Pein
Goldsmiths Classic Hammers - Goldsmiths
Weight 7oz • Domed face • Head Ø25mm • Head length 65mm • Overall length 260mm
Code H41187 Description
7oz, Ø25 x 65 x 260mm, Domed Face
UOM EACH Price £4.95
Cross Pein Hammers - Cross Pein - Warrington
• Also known as a Warrington hammer • Usually used for driving nails, pins and rivets • The cross pein is used to start the nail or pin, then the hammer is reversed to use the flat head to drive it home
• The steel heads on these hammers have a flat end and a chiselled end for forming and riveting for light to medium work
Dimensions: Weight x Overall Length x Head Length x Head Ø
Dimensions:
Head Shapes x Overall Length x Head Length x Head Size • Overall length 265mm • Head length 90mm
• These classic shaped hammers are commonly used in the workshops of goldsmiths
• Also for other kinds of uses for a wide variety of metal working
• With polished heads and hard wood handles the quality is exceptional particularly at this economical price
• The hex heads are flat and highly polished making it ideal for planishing
• The chiselled ends are perfect for riveting and raising, for medium to heavy use
Dimensions:
Head Shapes x Overall Length x Head Length x Head Size
Hex/Hex (265 x 90 x 16mm) UOM EACH Price £3.95
Dimensions:
Head Shapes x Overall Length x Head Length x Head Size • Overall length 265mm • Head length 90mm • Head diameter 18mm
Code H19525 Description UOM Round/Chisel (265 x 90 x 18mm) EACH
Pattern & Texturing Hammers - Pattern & Texturing
Superb double sided texturing hammers create a fantastic indent (cutting) or raised (blocking) pattern on your metals.
• “Cutting” is the official (Assay office) terminology for creating an indent pattern in your metals
• “Blocking” is the term for creating a raised pattern in your metal
• Experiment with our full range and give your work a unique, one off look by combining different pattern hammers
• Well balanced, hickory wooden handles • For non- ferrous metals • Multi-head hammer has 9 differing screw on pattern heads
How to use:
1. One must have a sturdy, flat work surface 2. Place a rubber planishing block on your surface (code D31265) and place a planishing block on top (Alternatively you can use the A34915 dual planishing block, an all in one tool perfect for the texturing hammer pattern process)
3. Place your metal on the planishing steel block and choose a pattern hammer 4. Strike hammer pattern head over metal evenly to create fantastic effects
Dimensions: Overall Length x Head Length x Head Ø x Patterns
Price £5.95
804
COUSINS TRADE SUPPLIER
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
