search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
GRAVERS, SCORPERS, SCRAPERS & DEBURRING


• Widia • 0.50 x 6.00mm section • Handle Diameter Ø8.0mm • Overal Length 135mm • Weight 25g


Excellent high quality, Bergeon Swiss, stem gravers will cut the hardest of metals without quick deterioration of the edge.


• Mounted on a metal knurled handle for the ultimate compatibility


• Plastic cap protector included • This hard steel graver will re-sharpen on a Diamond Lap Stone (code D33152)


Code G0750 Gravers Description


Bergeon 2931 Winding Stem Graver


UOM EACH Price £72.95


Flat Edge - Gravers - Vallorbe Swiss (0401) or Unbranded


The Flat Edge Graver is used to cut out parallel curves and lines when engraving, chasing, decorating or sculpting. A professional stone setter will always ‘bright cut’* prior to setting an open back type setting; such as between peg clusters or along the channel before setting the stone(s) into the mount. The now reflective base will act as a mirror to enhance the stones sparkle. Additionally, jewellers often rhodium plate over the ring mount after the ‘bright cut’ process especially when setting diamonds.


*Bright cut – the action of cutting the surface of the area where the stone is to be set, in order to enhance the stone.


• Wider, flat gravers such as No.24 create a unique finish by ‘rocking’ the graver from left to right while pulling the graver back creates an old fashioned and impressive textured effect on the surface.


Gravers


• Pack*2 • Ideal for watch makers & jewellers • Great starter gravers


• Stainless steel Code


G39426 G39427


Description Knife & Chisel


Square & Diamond Gravers, Set


UOM Price PACK*2


PACK*2


• Furthermore, illusion settings enhance the appearance of small stones, making them seem bigger. By cutting facets on the illusion plate (around the stone) with a flat scorper or a square graver, the metal will catch and reflect light, adding to the sparkle of the stone.


• Tool Steel (WS) = Length 80mm • High Speed Steel (HSS) = Length 65mm


• Vallorbe Swiss or Unbranded Code


Description G45792


£2.75 £2.75


A = 0.20mm (No.2) HSS


0401HSS2 A = 0.20mm (No.2) HSS, Vallorbe 0401WS2 A = 0.20mm (No.2) WS, Vallorbe G45793


A = 0.40mm (No.4) HSS


0401HSS4 A = 0.40mm (No.4) HSS, Vallorbe 0401WS4 A = 0.40mm (No.4) WS, Vallorbe G45794


A = 0.60mm (No.6) HSS


0401HSS6 A = 0.60mm (No.6) HSS, Vallorbe 0401WS6 A = 0.60mm (No.6) WS, Vallorbe G45795


A = 0.80mm (No.8) HSS


0401HSS8 A = 0.80mm (No.8) HSS, Vallorbe 0401WS8 A = 0.80mm (No.8) WS, Vallorbe G45796


A = 1.00mm (No.10) HSS


UOM Price EACH


EACH EACH


EACH EACH


EACH EACH


EACH EACH


EACH Graver set


• Set of 6 • Most popular flat edge shape • With wooden handles • Stainless steel


Set contains: • Flat edge, 0.10mm • Flat edge, 0.20mm x 2 • Flat edge, 0.30mm • Flat edge, 0.40mm • Flat edge, 0.50mm


Dimensions are approx. Code


G39425


Description Gravers Set


UOM Price PACK*6 £11.95


0401WS12 A = 1.20mm (No.12) WS, Vallorbe G45798


A = 1.40mm (No.14) HSS


EACH EACH EACH


A = 1.60mm (No.16) HSS


EACH EACH


A = 1.80mm (No.18) HSS


EACH EACH


EACH Graver, Flat Edge


graver is primarily used to cut excess metal away from stone settings, and when applicable, the metal between stones in a row or cluster. The appropriate size relates to the spacing of the stone(s), the amount of metal to be removed and the size of the gemstone.


• Tool Steel (WS) = Length 80mm • High Speed Steel (HSS)


• Vallorbe Swiss or Unbranded Code


G45816 G45817 G45818 G45819 G45820


Description A = 1.16mm HSS


A = 1.24mm HSS A = 1.35mm HSS A = 1.45mm HSS A = 1.50mm HSS


0406WS18 A = 1.80mm WS, Vallorbe 0406WS20 A = 2.00mm WS, Vallorbe 0406WS22 A = 2.20mm WS, Vallorbe 0406WS24 A = 2.40mm WS, Vallorbe 0406WS26 A = 2.60mm WS, Vallorbe 0406WS32 A = 3.20mm WS, Vallorbe


Graver, Lozenge


UOM Price EACH


EACH EACH EACH EACH


£6.95 £6.95 £6.95 £6.95 £6.95


EACH £11.15 EACH £11.75 EACH £11.90 EACH £12.85 EACH £13.15 EACH £15.50


Lozenge - Gravers - Vallorbe Swiss (0502)


This graver cuts out a unique diamond shape, like the Square Graver, it will cut out star shapes into metal and also raises grains to secure the stone and to enhance the look of the stone (Bright cut).


£5.50


EACH £12.95 £9.95 £5.50


EACH £12.95 £9.95 £5.50


EACH £12.95 £9.95 £5.50


EACH £12.95 £9.95 £5.50


0401HSS10 A = 1.00mm (No.10) HSS, Vallorbe EACH £12.95 0401WS10 A = 1.00mm (No.10) WS, Vallorbe


0401HSS12 A = 1.20mm (No.12) HSS, Vallorbe EACH £12.95 G45797


A = 1.20mm (No.12) HSS £9.95


£5.50 £9.95 £5.50


0401HSS14 A = 1.40mm (No.14) HSS, Vallorbe EACH £12.95 0401WS14 A = 1.40mm (No.14) WS, Vallorbe G45799


0401HSS16 A = 1.60mm (No.16) HSS, Vallorbe EACH £13.45 0401WS16 A = 1.60mm (No.16) WS, Vallorbe G45800


0401HSS18 A = 1.80mm (No.18) HSS, Vallorbe EACH £14.00 0401WS18 A = 1.80mm (No.18) WS, Vallorbe


0401HSS20 A = 2.00mm (No.20) HSS, Vallorbe EACH £14.70 0401WS20 A = 2.00mm (No.20) WS, Vallorbe EACH


0401HSS24 A = 2.40mm (No.24) HSS, Vallorbe EACH £15.40


• Tool Steel (WS) = Length 80mm • High Speed Steel (HSS)


Graver, Knife


• Vallorbe Swiss or Unbranded Code


Description G45810 A = 1.24mm (No.4/0) HSS A = 1.35mm (No.3/0) HSS


UOM Price EACH


EACH EACH Comprised of a knife edge with straight sides, this www.COUSINS .COM EACH


£9.95 £5.50


£9.95 £5.50


£9.95 £9.95 Graver, Onglette or Spitstick


*Bright cut – the action of cutting the surface of the area where the stone is to be set, in order to enhance the stone.


• Cut out parallel curves and lines when you are engraving, chasing, decorating or sculpting.


• For cutting and turning balance staffs in a watch and clock.


• Tool Steel (WS) = Length 110mm • Vallorbe Swiss


Code Description


0502WS175 A = 1.75mm, WS 0502WS200 A = 2.00mm, WS 0502WS250 A = 2.50mm, WS 0502WS300 A = 3.00mm, WS


UOM Price EACH


EACH EACH EACH


£7.15 £6.65 £6.65 £8.75


Onglette or Spitstick - Gravers - Vallorbe Swiss or Unbranded


Comprised of a knife edge and curved sides, this graver is primarily used to cut excess metal away from stone settings, and when applicable, the metal between stones in a row or cluster. The appropriate size relates to the spacing of the stone(s), the amount of metal to be removed and the size of the gemstone.


£5.50


0403WS40 A = 1.24mm (No.4/0) WS, Vallorbe EACH £10.50 G45811


Knife Edge - Gravers - Vallorbe Swiss (0406) or Unbranded


0403WS30 A = 1.35mm (No.3/0) WS, Vallorbe EACH £10.50 G45812


A = 1.45mm (No.2/0) HSS


0403WS20 A = 1.45mm (No.2/0) WS, Vallorbe EACH G45813


A = 1.58mm (No.0) HSS £5.50


£5.50 £9.50 £5.50


799


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102