CLOCK SPECIFIC
5. Fit the hollow cutter (F) to the wooden handle (M) and cut a circular hole around the pivot by pressing and turning the handle. (Fig 3)
6. Remove the cutter and replace with the tap (T) and thread the hole. (Fig 4)
7. Loosen the screws and remove the tool from the plate.
8. Push the wheel pivot up through the hole and select a suitable size bush by holding in the bush holder (PB). If the bush hole needs enlarging this can be done by reaming out while held in the holder. (Fig 5)
9. Screw the bush into position with the key (C). (Fig 6) 10. Lock in the plate by centre popping the plate close to one of the niches. (Fig 7)
Click website “More Information” for full specification. Code
Description
B19465 R19477 R19472 K19959 T35882
Screw In Bush Clock Bushing Tool Tool Cutter Ø4.50mm (F) Tool Cutter Ø5.20mm (F1) Tool Key (C)
Tap for Bushing Tool (T) Code
UOM Price EACH £295.00
EACH £25.95 EACH £26.15 EACH £18.95 EACH £28.95
Bergeon 16200 Complete Set New improved version
• Bushing tool that allows the centring, milling and reaming of clock plates
• Can remove and set brass or bronze bushings (including on very large clocks such as “comtoise” or “Morbier” clocks).
• Black anodized aluminium frame • Can hold plates from 50 to 220mm • Practical for all clocks, from mantel clocks to grandfather clocks
• 355 x 355 x 180mm • Bergeon 16200R
Reduced set, includes: • Complete tool frame • 10 Reamers: Ø1.27, 1.97, 2.47, 2.97, 3.47, 4.47, 5.47, 6.47, 7.47 & 8.47mm
• 1 Chamfering tool: Ø4mm • 4 Drilled stakes: Ø8 x 3, 10 x 5, 16 x 8 & 30 x 10mm (stake x hole)
• 3 Driving punches: Ø3, 6 & 9mm • 1 Centring bit • 1 Centring stake: Ø16 x 9mm (stake x point)
New improved version
• Bushing tool that allows the centring, milling and reaming of clock plates
• Can remove and set brass or bronze bushings (including on very large clocks such as “comtoise” or “Morbier” clocks).
• Black anodized aluminium frame • Can hold plates from 50 to 220mm • Practical for all clocks, from mantel clocks to grandfather clocks
• 355 x 355 x 180mm • Bergeon 16200
Tool includes: • Complete tool frame • 10 Reamers: Ø1.27, 1.97, 2.47, 2.97, 3.47, 4.47, 5.47, 6.47, 7.47 & 8.47mm
• 4 Drilled stakes: Ø8 x 3, 10 x 5, 16 x 8 & 30 x 10mm (stake x hole)
• 3 Driving punches: Ø3, 6 & 9mm • 1 Centring bit • 2 Centring stakes: Ø16 x 4 & 16 x 9mm (stake x point) • 1 Undrilled stake: Ø25mm • 2 Chamfering tools: Ø4 & 10mm • 5 Pivot cutters: Ø2.20 x 0.40, 3.00 x 0.70, 5.00 x 1.50, 6.00 x 3.00 & 9.00 x 5.00mm (cutter x pivot)
• 1 Jacob chuck: Opening 0 to 4mm Code
Description B0290
Bergeon 16200 Bushing Tool Complete Set
UOM Price EACH £995.00 B4929
Comprising all components of Bergeon 16200 complete tool (B0290).
Code Description
Bergeon 6200E Bushing Tool Full Accessory Set
UOM Price EACH £520.00 Code
B0279 B0280 B0281 B0282 B0283
Description UOM Price
Ø2.20mm Pivot/Rose Cutter 6200.26 EACH £29.95 Ø3.00mm Pivot/Rose Cutter 6200.27 EACH £29.95 Ø5.00mm Pivot/Rose Cutter 6200.28 EACH £30.95 Ø6.00mm Pivot/Rose Cutter 6200.29 EACH £30.95 Ø9.00mm Pivot/Rose Cutter 6200.30 EACH £32.95
• 1 Undrilled stake: Ø25mm Code
Description B0291
Bergeon 16200R Bushing Tool Reduced Set
UOM Price EACH £750.00 Code B48324 B48325 Description
Ø4.00mm Centring Stake, Bergeon 6200.12
Ø9.00mm Centring Stake, Bergeon 6200.12
UOM Price EACH £25.50 EACH £18.95 B9560D Description
Centring Bit For Bergeon Bushing Tool
Centring Stakes, Bergeon
• Bergeon 6200.12 & 6200.13 • For 16200 & 16200R bushing tools.
• Size given is the point diameter
• Ø16mm stake UOM Price EACH £7.50 Bergeon 16200R Reduced Set Centring Bit, Bergeon
• Bergeon 6200.06 • For 16200 & 16200R bushing tools.
Cutters (chamfering), Bergeon
Chamfering cutters for 16200 & 16200R bushing tools.
Bergeon 6200E Full Accessory Set Code
B0277 B0278
Description
Ø4mm Chamfering Bit, 6200.24 Ø10mm Chamfering Bit, 6200.25
UOM Price EACH £13.85
EACH £17.50 Cutters (pivot/rose), Bergeon
Pivot/rose cutter for 16200 & 16200R bushing tools.
www.COUSINS .COM
695
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100
