INDUSTRY ROUND-UP
Portable Analyser is Certified for Marine Emissions Monitoring
A portable analyser designed for monitoring emissions from ships is now available for sale or rent from Ashtead Technology. “With increasing global efforts to limit ship emissions, and with new regulations to reduce sulphur dioxide emissions coming into force on 1st January 2020, the addition of the Testo 350 MARITIME instrument is perfectly timed,” says Ashtead’s Environmental Sales Manager, Josh Thomas.
The Testo 350 MARITIME is the world’s first portable analyser certified for the measurement of marine diesel engine exhaust gas emissions
according to MARPOL Annexe VI and NOx Technical Code 2008.
It also complies with the directive on marine equipment and has the MED mark of conformity 0098/2018.
The analyser is able to measure a wide range of the most important gases simultaneously, including NO, NO2
, SO2 , CO, CO2 and O2 .
As such, it is ideal for the periodic on-board direct measurement of emissions, as well as after modification or adjustment of the engines. In addition, it can be employed for official monitoring measurements to check the NOx limit values prescribed in MARPOL Annexe VI, and in special regional zones relating to the NOx tax in Norway, for example.
As a semi-continuous multigas analyser, the Testo 350 MARITIME provides a complete picture of combustion emissions. This provides an additional benefit because it can therefore be used to optimise engine performance; lowering fuel consumption and reducing greenhouse gas emissions.
Weighing just 17kg, the instrument is supplied complete with a re-chargeable battery and gas sampling probe, and with a robust, wheeled, protective case it is easy to transport, including by aircraft.
According to the International Maritime Organisation (IMO) MARPOL convention for the prevention of pollution from ships, from 1st January 2020 the sulphur content of fuel oil used by ships shall not exceed 0.50% – which is 80% lower than the current 3.50% limit.
“This will undoubtedly lower SO2 emissions,” comments Josh Thomas. “However, the situation is complicated because there are no guarantees that ship operators will be able to source low sulphur fuels, and fuels may become mixed when tanked aboard. In addition, some ships are equipped with emission scrubbers so they should be able to continue to use fuels with higher sulphur content.
“It follows therefore, that the best way to ensure that emissions are reduced is to monitor them directly, and the Testo 350 MARITIME makes that possible, in a system that can be easily transported from ship to ship.”
H
www.ashtead-technology.com 48
www.dockyard-mag.com September 2019
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
