transfluid Smart software reduces the


number of production steps With the two latest versions of the t project software by transfluid the tube manufacturing process is safer.


T


he idea behind the t project software is a systematic approach to controlled tube


manufacturing. What is complex becomes simple. To do this, it is possible to connect it to CAD, BDE or ERP systems, tube bending machines or bending robots. All the most common interfaces can be used. The processes can be visualized


and validated. Two versions of the software have been developed, which play a key role in different areas of tube processing and custom solutions. They can be used depending of the requirements of the specific process.


Safe planning of complex geometries and bending sequences A strong feature of the software is that it reduces the number of steps necessary to manufacture a finished component and this makes the production cheaper. For that reason, it is an effective solution for bending machines and it can be used together with all the


The software guarantees reliable processes with collisions tests, before the actual bending process


usual CAD system. The software will eliminate any possible collisions with the equipment, the tools and the environment before the actual bending process starts. It tests the feasibility of the tube geometry. The necessary


tool and machine parameters are delivered online through the CAD system. If a robot is used for the bending, the software will process the data, without an expensive reprogramming of the robot. To do this, it is possible to load data


in the same way as for a standard bending machine. The pre-installed software will calculate all the necessary movements for the robot. The automatic product- specific adjustment of the bending speed for all transfluid machines makes it possible to process long tube safely and without oscillations.


The bending processes are safe, when planning with the transfluid software. 20 IMT April 2019


Cutting that saves raw materials and exact identification for networked processes The software solution also helps with the economical cutting of tubes. With integrated cutting systems the transfluid software will optimize the cutting pattern. The cutting lengths are calculated with precision and fewer raw materials are used. This is particularly effective with transfluid’s t cut equipment for orbital chipless cutting. A cutting sequence is


www.internationalmetaltube.com


© transfluid


© transfluid


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24