Golf
consistency of plasticine.” The original greens were not good enough and the contractor was forced to return to construct them properly, he adds. They deposited a pea gravel layer at about eighteen inches depth, then sand, then put on very fine sand on top. Under a rolling programme of
improvements, three years ago Colin and the team began inch-wide drills, adding topdressing (kiln dried sand) down to twelve inches to gradually build up a higher quality
profile. “Slowly, but surely, we’ve developed it to 4/4.5 inches depth, but we really need twelve inches for a decent rootzone and this will take years to achieve. We have a continuing struggle to keep the greens dry and firm. In fact, most of the fairways drain better than the putting surfaces.” “A green tells you if it’s suffering. You must get out there and look, but also use the data as a call to action. We’re tickling them all the time to improve performance.” “The original work of drill and fill may
have cost us up to £15,000, but definitely improved conditions. Pumping plenty of air into the greens has certainly firmed them up.” Their Sisis Aeraid tine releases compressed air at about four inches and the team use it throughout the traditional playing season and in winter. “Compaction was the main problem when
I first came here,” he continues. “Lots of areas have improved because of introducing air into the ground. So many good things come from aeration. More air means less
PROFESSIONAL OVERSEEDING RESULTS AT AN AFFORDABLE PRICE
All turf suffers from the consequences of ageing and as the years go by, grass plants die and species disappear, reducing the density of the growth. As a result, more and more unwanted guests such as weeds and thatch get the chance to become established in the turf. Scarification and certain herbicides can briefly interrupt this decline but the only way to solve the problem completely is to renovate the turf and the Eliet DZC600 Overseeder makes high tech overseeding possible at an affordable price.
OVATIVE OVERSEEDING TECHNOLOGY
1. CUTTING OPEN THE SOIL The cutting blades at the front of the machine cut open 8mm (0.3”) to 15mm (0.6”) deep grooves in the soil of the turf in preparation for the grass seed.
2. REMOVAL OF EXCESS SOIL The blades rotate over the top and cast the soil in an arch to the rear of the machi- ne so that it does not fall into the newly cut grooves.
3. PRECISION SOWING A clever and compact seed distribution system, Helix Seed DuctTM
der the projected excess soil into small funnels leading to discharge channels precisely located above the clean grooves.
, carries the seed un-
4. INJECTION A small air pressure generator blows air through the seed funnels so the seed is blown while it is being distributed. This helps the seed to settle faster and with more precision in the grooves.
5. ROLLERS The powered rubber roller immediately follows the seed distribution process and ensures that there is good contact between the soil and the seeds by pressing the earth down.
6. COVERING THE SEED The flow of projected excess earth falls just behind the roller on the sown area. The earth covers the seedbed and provides a protective layer for the seed, increasing the
chances of germination and growth.
PSD GROUNDSCARE ltd | 08450 773773 |
sales@psdgroundscare.com |
www.psdgroundscare.com PC JUNE/JULY 2017 I 43
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156