POOL LIGHTING
work with many specialist installers to offer seamless integration.
LED lamps behave differently in water to other sources and the specific characteristics in terms of lumen outputs and beam angles produce many different effects. Height positioning and tile colour beam angles need to be considered for the project to be a complete success rather than a near miss. Not all lamps are created equal, many interpretations of ‘Green or Energy saving lighting products’ can be very misleading. E.g. if you have an LED lamp using 35W of power this does not necessarily mean you are saving any power if you are replacing a halogen at 300W at 8,000 lumens. The lumen output is far higher of the halogen lamp than most LED lamps so you will need to install multiple LED lamps to bring the light output up to the same levels thus cancelling out any power saving! Buyer beware of cheap inferior lamps flooding all lighting markets as they are often not very efficient and can be unreliable along with not conforming to Part L II. All lighting provided by Atmospheric Zone exceeds the current regulations and are fully CE and RoHS compliant.
Atmospheric Zone, offer a full specification package for the whole building if required, currently supplying lighting systems for Harrods, Selfridges, and many commercial premises here in the UK and Europe.
With 25-metre competition pools on site, compliance with FINA guidelines was essential. In this area, specified lighting levels were 500 lux throughout, rising to 600 lux at starting and turning points. Lighting within the water for these, as well as the training pool, is provided by A2 50W daylight white LED units. In the 365m2
recreational pool, lighting
levels are at their lowest – just 250 lux. To create a fun, relaxed atmosphere for casual bathers, A4 multicolour and white LED underwater lighting was used to set the mood. Like all of its underwater products, the A4 has been pressure-tested to 16 bar – ensuring it can handle depths up to 25m. EVA Optic was also to provide lighting throughout the 6,200m2
complex. In the
entrance area, changing rooms, toilets, meeting and conference rooms, LED DL downlights were used. In the plant room, LED W wall and ceiling lights were specified. For effective central control and optimised economy, all lighting units were linked into the Building Management System (EIB/KNX).
The same LED lighting range is now available in the UK through an exclusive partnership with Golden Coast. Lighting systems can be retrofitted into existing facilities or incorporated into new designs.
www.swimmingpoolnews.co.uk
Available either as a complete
PU6 (left) or PU9 (right) Certikin
underwater
light or ideal for retro
fit into any
PAR56 type lamp unit
CERTIKIN LIGHTS THE WAY WITH LED LIGHTING
The one guaranteed way of reducing running costs on a pool at the same time as enhancing its ambience is by the installation of LED lighting. The Certikin LT LED light offers staggering lamp life of up to 100,000 hours, that’s about 11 years if left on permanently. They also use less than 10% of the energy used by traditional 300W pool lights. The Certikin PAR 56 Underwater Light is environmentally friendly thanks to its long life expectancy and energy efficiency. It’s available in either a white light or a multicoloured light unit (six fixed colours and six colour sequences) where a choice of fixed colour or automatic colour sequencing can be used to create a range of different effects. Available either as a complete PU6 or PU9 Certikin underwater lights are ideal for retro fit into any PAR56 type lamp unit, the Certikin LED light is an ideal upgrade for any pool.
Colour sequencing on multicolour LED lamps can be controlled either by push button or via a control box. For ease of control on the poolside, a remote control can be used in conjunction with the control box.
A SPLASH OF COLOUR FROM WATERCO
The BriteStream multicoloured LED light has been cleverly designed with a built-in colour memory which means that it always defaults to its last colour selection. It
Waterco’s BriteStream LED concrete niche light is a flush-mounted light which protrudes only 9mm from the pool/spa wall
has seven unique colours plus two colour changing modes to create the perfect pool side ambience. Waterco has developed the new state of the art range of BriteStream LED lights for use with concrete, wooden, liner and fibreglass pools. This complete range offers a light for every installation.
The BriteStream LED concrete niche light is a flush-mounted light which protrudes only 9mm from the pool/spa wall. Its energy efficient, super bright LEDs are capable of delivering 352 lumens of light and operating on only 15 watts of energy. The BriteStream range offers a long life span of over 70,000 hours and is available in Brite white, electric blue and multicoloured versions.
Waterco’s BriteStream
multicoloured LED light has been cleverly
designed with a built-in
colour memory which means that it always
defaults to its last colour selection
SPN June 2014 73
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92