SKILLS GAP
TURBINE CONTROL WORKSHOP SHOWCASES GREEN ENERGY AMBITIONS
New wind turbine control technology being developed at the University of Hull was top of the agenda at a prestigious two-day workshop in Hull last week.
Some of the world’s leading turbine manufacturers attended the workshop, providing an opportunity to share cutting- edge intelligence on making offshore technology more reliable and efficient.
UNIQUE RESEARCH
Delegates were given an insight into unique research by Prof. Ron Patton of the University of Hull’s Department of Engineering into developing sophisticated Fault Detection and Diagnosis and Fault Tolerant Control systems capable of maintaining high levels of performance in a range of wind conditions and improving fault detection and repair.
SUSTAINABLE CONTROL OF OFFSHORE WIND TURBINES EVENT The event showcased the University’s leading role in developing robust control systems, which could hold the key to harnessing more of Britain’s wind power as the country’s renewable energy sector prepares for a period of unprecedented growth.
“There is more and more interest in offshore wind energy in the UK as a major renewable energy source for electric power,” said Prof. Patton. “While the technology is proven, it is still evolving and our aim is to make the next generation of wind turbines more cost-effective, reliable, safe and easier to maintain.”
Left to right, Prof. Kathryn Johnson, Colorado School of Mines; Prof. Ron Patton, University of Hull; Dr Peter Odgaard, KK-Electronic, Ikast, Denmark; Prof Jacob Stoustrup, Aalborg University, Denmark, and Dr Ervin Bossanyi, Garrad-Hassan.
CASS
The workshop is hosted by CASS, the University’s business-facing hub for renewable energy and the low carbon economy.
Prof. Stephanie Haywood, director of CASS, said: “To make offshore wind financially viable, costs need to be reduced from £150/MW to £100/MW.
“Fault tolerant control of offshore wind turbines can both increase the amount of power converted from wind into usable electrical power, making them more efficient and reducing the cost per watt.
62
www.windenergynetwork.co.uk
offers a solution through combining estimation and monitoring with fault- tolerant control and self-repair.
“The enhanced control systems could be added to existing turbine designs, so a short timescale is possible, but realistically this might be three to five years.”
University of Hull
www.hull.ac.uk
CONTROL SYSTEMS
Control systems being showcased at the event indicate it is possible for offshore wind turbines to provide sustainable electrical power over a wide range of wind speeds and to survive undamaged in bad- to-extreme weather.
Tested using an advanced simulation of a 4.8MW turbine, they can also be used to provide constant condition monitoring, detecting and ‘self-repairing’ of faults before they become serious.
“It also limits the operating power/ turbine speed to some specified values to prevent the turbine from unsafe operation under high wind conditions, thus reducing maintenance requirements. Since around 15 per cent of the whole-life cost of offshore wind energy comes from maintenance issues, fault tolerant control can make a further significant contribution towards cost reduction.
“The large fluctuations in wind speed and energy offshore means that the turbine must work in a very harsh and demanding environment. Increase in turbine size to multi-megawatt capacity gives rise to an increase in probability of turbine system faults and control system faults, as well as structural faults due to material fatigue.
“Current offshore wind control technology does not allow for sufficiently efficient operation with wind speed variations. The University of Hull work
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108