Relative Humidity/ Temperature Combinations A/RH-TEMP Series
DeSCrIpTIon
The A/RH-TEMP Series Relative Humidity transmitters, convert a resistance to a linear 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output. The current signal may be transmitted over long distances on unshielded twisted-pair wire and will not be affected by the lead wire resistance orelectrical noise.
FeATureS • Low Drift
• Highly Repeatable • Temperature Sensor Ouput
BuILD A pArT nuMBer
Table 1 Table 2 Table 3 Table 4 Table 5 X
XXX
Table 1 A/
G
Table 2 RH1 RH2 RH3 RH5
Table 3 100 1K
1.8K 2.2K ASI 3K
AN(10K Type III) CP(10K Type II)
CSI(10K) 20K 100K 1K
Nickel
10KS (10K) TT1K** TT100** TTM1K** TTM100**
XX XXX XXX A/
Accuracy (+/- 1%)* (+/- 2%) (+/- 3%) (+/- 5%)
*Specify a 20 % RH Range when ordering an A/RH1%Temp Sensor 100 1K
1.8K 2.2K ASI 3K
AN(10K Type III) CP(10K Type II)
CSI(10K) 20K 100K 1K
Nickel
10KS (10K) TT1K** TT100** TTM1K** TTM100**
**Specify a Temperature span for TT and TTM Units.
Table 4 R
RO RO
RSO D O
SP
Configuration Room
Room w/Override Room w/Set Point*
Room w/Set Point &Override* Duct
Outdoor Air Stainless Plate
* See Temperature Cut sheet for additional information on setpoint specs The (SP) Stainless Plate configuration is not available for these units