DMPR-KC002, DMPR-KC003, DMPR- KC004, and DMPR-KC007 are blade pin extensions used to accommodate external linkages and actuators. They should be used on the preferred driving blade.
Model DMPR-KC005 Model DMPR-KC051 Blade Pin
Extension with Coupler
Crank Arm, 3/8 Inch Diameter Shaft
DMPR-KC005 is a 7 inch long blade pin extension with a coupler to be attached to another blade pin extension. It should be used on the preferred driving blade.
DMPR-KC051 provides a connection from actuator to damper blade pin extension with a 3/8 inch diameter drive shaft, adjustable from 1 to 2-3/4 inch radius.
Model DMPR-KC054 Blade Arm
Use the DMPR-KC054 Blade Arm to link damper actuator rod hardware directly to damper blades.
Model DMPR-KC202 Model DMPR-KC251 Model DMPR-KC300
Pin-to-Pin Coupling
DMPR-KC202 horizontally couples panels pin-to-pin. Order one kit per 48 inches of panel height. Install a coupler on every pin.
C
Universal Mounting Bracket
Swivel Ball Joint
DMPR-KC251 is a bracket designed for use with Johnson Controls dampers for electric or pneumatic actuators.
DMPR-KC300 provides a connection between the blade arm, crank arm, etc. and the linkage rod. Each kit includes ten swivel ball joints.