FEATURE: STADIUM AUDIO
Audio’s WideLine8 series, offering a typical solution. “Compact, articulated line arrays help to avoid sightline issues,” says Martin Barbour, product applications specialist at QSC. “140° horizontal coverage allows for either fewer required arrays to cover the audience area or for improved stereo imaging, provided the conventional number and spacing of arrays is used.” Bowl systems developed
for soccer stadiums are a combination of suitable performance and cost efficiency, according to Brad Ricks, JBL Professional’s senior application engineer.
“These stadiums tend to have a cover over the audience area providing an excellent mounting location for a distributed system,” he points out. “Loudspeakers are placed near the edge of the structure and typically cover an entire vertical section of the building. The resulting throw distance to the seating – along with performance expectations, intelligibility requirements and cost constraints – combine to determine the appropriate product type. “The systems should also be weather-resistant: suitable product can be purpose-built for the outdoors, such as the JBL AW-series, or modified standard product that uses fibre glass treatment and stainless steel hardware.” “The goal of every stadium
‘We’re seeing a trend to higher quality, especially in speech intelligibility for voice
announcements and alarms’ Oliver Sahm, Electro-Voice
architect is to build a unique place that suits not only the needs of the sport it was built for, but also augments the spectators’ emotional involvement,” comments Martin Reich, CEO of Zurich- based AudioConsulting AG, respected Meyer Sound user and a veteran of several festivals and tournaments including as stadium sound project leader for UEFA’s Euro 2012 and Euro 2008 finals and the World Gynaestrada 2011 in Lausanne. “One important factor is the loudness of the cheering crowd, so usually sports arenas are deliberately very reverberant to make the crowd louder. But involving the crowd is also the goal
of the content, like the commercials played on the giant screens, while the sonic quality of stadium announcements is an important factor.” Amplifying any audio signal in such a place is a challenge: the ability to control frequencies below 250Hz is important. “Only highly directive
speaker systems can bring better quality audio with full frequency range and high dynamics. With the use of technologies like beam-steering and beam- shaping we will see dramatic changes in the future. Such technology also allows us to exclude certain positions from being polluted by the PA, like the media and commentary positions, field reporters and TV studio positions, while providing a full level for the rest of the bowl.
“The disadvantage of this technology is the need to run every cabinet on its own processor and amplifier channel, so self-powered speaker systems will greatly simplify this kind of implementation and set-up. Installing an amplifier channel and running a loudspeaker cable of sometimes more then 100m per line array cabinet will be a thing of the past when you can run just one Cat5 or fibre cable and power to the array. This is not a dream: it’s a reality in products like Meyer Sound’s Column Array Loudspeaker, for example. “Network standards like
AVB or AES67 will be the backbone to make this happen very soon. I don’t think that everybody involved in a stadium production – like the broadcasters, the stadium AV infrastructure
and so on – would like to rely on a network with a single sync master. But once bridge switches arrive, with the ability to connect asynchronous networks together, the RJ45 connector will quickly replace the XLR as the common audio interface.”
NETWORKS The progress of fibre-optic networks now seems embedded in the progress of German fibre-optic distribution pioneer Optocore. Its strategic partnerships latterly included Clear-Com, a company with its own mission to connect the globe via comms systems. The first fruits of this labour were the V3R-FX-Intercom, a 4-channel unit, and the 8-channel X6R- FX 8, both of them Clear-Com devices based on Optocore’s X6R and V3R signal converter platforms. As a result,
The Tele2 Arena in
Stockholm is fitted out with a complete QSC solution
www.installation-international.com
June 2014 21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80