PLAST Preview
All-Electric Injection
a one-cavity tool with a hot runner. In demonstrates 30% shorter reaction times supported with automation and peripherals
addition to precision, speed and very than conventional machines. In addition to
Moulder
by its partners, Star Europe and Piovan.
complete standard equipment, the all- demonstrating significantly reduced cycle
electric machine is competitively priced, time, the machine requires up to 45% less
Haitian Europe SRL
At this year’s Plast ‘09 the specialists will
says the company. Energy efficiency is the energy than comparable competitors. At the
set eyes on the quality precision of the all
Tel: +39 030 7751306
key point of the “Haitian Mars Series” MA convention, the Mars will produce a
electric “Zhafir Venus Series” VE 1500/430. 3200/1700. Still unique on the European suitcase from PP-21 from a one-cavity tool
Email:
info@haitianeurope.com
The Venus produces a 1 l food container market is the innovative servomotor drive with hot runner. During the entire machine
Web:
www.haitianeurope.com
from PP-70 with a three-axis robot. The 54 g which accelerates from 0 to 2,000 rpm in cycle, its energy use can be observed on
form piece is injected in about 8 seconds in just 0.05 seconds — and therefore an additional monitor. Haitian Europe is Hall 24, Stand D34
PLAST Preview
Innovative and
Some 20 staff in Vimercate/Milan and time of just 2.6 seconds. The duo 500 pico this, the ENGEL e-max comes with a central
dealers throughout the country cater to the is thus the fastest dual platen machine on power supply for the servodrives including
Economical Injection
needs of the company’s Italian customers. the market — despite its comparatively low
recovery of braking energy. The benefit here
Moulding
At Plast ‘09 the company will be presenting energy requirements. At Plast Milano
too is maximum energy efficiency. An
energy-optimised solutions for all relevant ENGEL will be showing an automotive
ENGEL e-max 310/100 with a clamping
force of 100 tons will be on show,
Innovative and economical injection
branches. The most important innovation application on a duo 3550/500 pico. Fully-
demonstrating the production of an
moulding system solutions have helped
from a machine-technology point of view is electric, compact and extremely
electronic component using a mould by FCI
ENGEL make a global market leader in this
the newly developed ENGEL duo 500 pico. economical, but still equipped with the
Austria (Mattighofen).
sector. ENGEL is once again set to
The ENGEL duo 500 pico brings the tried- critical options that help customers optimise
demonstrate its competence at Plast ‘09.
and-tested strengths of the large-scale injection moulding. This is the new ENGEL
Engel Austria GmbH
ENGEL will be showing five exhibits from its
machines to the 500 ton clamping force e-max. Exhibited for the first time at K 2007,
Tel: +43 50 620 0
Automotive, Packaging, Teletronics, Medical class. The machine’s minimal footprint and the machine offers both a comparatively
Email:
sales@engel.at
and Technical Moulding divisions to cover low weight, thanks to a compact dual-platen small footprint due to its highly integrated
Web:
www.engel.at
all relevant industries. The company clamping system, mean maximum energy drive and control technology, and maximum
launched its facility in Italy 20 years ago. efficiency and record-breaking dry cycle precision and process reliability. On top of Hall 24, Stand A19 and B20
www.eppm.com EPPM 17
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36