24 Gutter Components Specification Listing


To customise and complete the model specification please select the items as required from the following components list


SUMPS: Factory fabricated and sealed and supplied as part of a section of Unifold® gutter. Install fully in accordance with manufacturers instructions.


SIDE BOXES: Factory fabricated and sealed and supplied as part of a section of Unifold® gutter. Install fully in accordance with manufacturers instructions.


SECTION CHANGE: factory fabricated and sealed to include a small section of each gutter. Install fully in accordance with manufacturers instructions


EXPANSION / CONTRACTION JOINT: Manufactured as an integral part of a Unifold® section to be installed between two fixed points ie:- two outlets / one outlet and at the stop-end / corner or junction. To be fitted fully in accordance with manufacturers instructions. System drawing number 1024


SIPHONIC OUTLET SECTIONS: Manufactured as an integral part of a Unifold® section. To be fitted fully in accordance with manufacturers instructions. System drawing number 1026


CORNERS: factory fabricated and sealed. To be fitted fully in accordance with manufacturers instructions


System drawing number 1027


TEES: Factory fabricated and sealed. To be fitted fully in accordance with manufacturers instructions. System drawing number 1028


PERMANENT TIE-OFF ASSEMBLY: Supplied in component kit form to permanently terminate Unifold® within the length of the gutter ie:- at the party line of two buildings sharing the same gutter. Install fully in accordance with manufacturers instructions. System drawing number 1017


PVCU OVERFLOW UNITS 50mm DIAMETER x 300mm LONG: Supplied as a factory fabricated unit. Install fully in accordance with manufacturers instructions. System Drawing number 1035


SNORKEL OVERFLOW UNITS (For flashing existing overflows): Supplied as a factory manufactured unit. Install fully in accordance with manufacturers instructions. System drawing number 1025


SNORKEL OVERFLOW UNITS (For the insertion of new overflows): Supplied as factory fabricated unit. Install fully in accordance with manufacturers instructions


System drawings may be obtained from Ampteam on request.


The UNIFOLD® Solution


01384 252777 Phone us


unifold@ampteam.co.uk Click on email


www.gutterliners.com Click on website


UNIFOLD® gutter lining system Gutter Components Specification Listing


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28