10


Concrete and Finlock Gutters Concrete gutters Where they perform generally as valley and boundary wall conditions in commercial and industrial applications, can be treated as normal Unifold®


installations.


They are, however, often shallow and any increase in depth, which can be achieved, should be considered.


has often improved the size and performance of these gutters by taking advantage of roof refurbishment programmes or extending the gutter wings further up the roof slope or by using the construction depth of the existing roof in "dry" roof conditions.


Unifold® Finlock gutters


As well as on commercial properties, Finlock gutters are often found on domestic buildings


where they serve single dwellings to terraced blocks of houses. As these gutters are supported on the external walls of these properties any leaks almost invariably find their way to the inside of the building, causing great discomfort to the occupants and damage to internal walls and decorations.


There are also occasions when these gutters have overflowed into the building.


The Unifold® installation to these gutters usually


requires the removal of the bottom row of slates or tiles to expose the bottom tiling batten, Unifold®


is


fitted into the gutter and the roof slope leg extends to this exposed batten. Corner sections and stop ends are factory fabricated, as are outlets.


The final installation provides a leak free system, which will not discharge into the building in any way.


Typical corner unit


The UNIFOLD® Solution


01384 252777 Phone us


unifold@ampteam.co.uk Click on email


www.gutterliners.com Click on website


Designed to suit Concrete and “Finlock” Gutters


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28