PRODUCT UPDATE PRODUCT UPDATE LASERS
Diode laser components
Coherent has released higher power, higher brightness 780-830nm and 975nm diode laser components for industrial applications. Built through Coherent’s vertically integrated semiconductor manufacturing line, these products achieve excellent performance and batch-to-batch consistency.
TruDisk 421 Pulse
Trumpf has developed a pulsed, green laser for efficient welding of copper, the TruDisk 421 Pulse. This new disk laser, in pulsed mode, operates at a mean power of 400W, generating laser light at 515nm. Light in the green spectrum solves the problems previously experienced when using infrared lasers to weld copper.
Copper is an excellent conductor of both heat and current, making it a suitable metal for many applications in a variety of industries and sectors. In addition to medical technology and the automotive, chemical and foods industries, copper is indispensable to electronics and electrical technology.
Due to ever more compact housings and the higher performance capacities of electronic components, demands on the production and joining technologies for copper components are also rising.
When using the laser to weld copper, beam
sources with an infrared wavelength are commonly used. The two greatest challenges here are good reproducibility and low spattering. At a wavelength of 1,000nm (IR), copper is highly reflective. Uniform welding seams – which will depend on the surface
At 780-830nm, Coherent’s AAA technology has been extended to now include 60W and 80W low fill factor bars – as well as a new 70W 800µm-core fibre array package (FAP) – all qualified to 20,000 hours lifetime. At 975nm, Coherent offers high-efficiency 60W, 100W, and 150W low fill factor bars, also qualified to 20,000 hours lifetime.
At both wavelengths, these diode bars
are ideal for fibre coupling and optical beam combining. They enable high-brightness beam delivery for applications such as the pumping of solid-state and fibre lasers, as well as direct diode materials processing, including metal welding, cladding and heat treating.
www.coherent.com
properties – can be guaranteed only to a certain degree, a degree that is often not sufficient. Spattering is a problem during deep welding. The spatter can damage the component and, in the worst case, cause short circuits on the board. Both can be countered by properly matching the laser parameters – such as the distribution of power density, the pulse width and the shape of the vapour channel. But despite this, the results are often still less than ideal.
What cannot be influenced are the surface tension and viscosity of copper. Both properties are lower, when compared with steel and they lead to a less stable weld pool. This is aggravated
by increased energy loss due to the high thermal conductivity of copper. The new laser from Trumpf leads to a considerable improvement in the process. To generate the green wavelength in the TruDisk 421 Pulse, the frequency of the laser beam is doubled inside the laser resonator. Copper absorbs the green light far better than the infrared, which means that the material reaches its melting temperature faster, the welding process starts quicker, and less laser power is required. While the infrared laser works with 2.6kW of peak pulse power, the green laser requires only 1.4kW for the same welded seam. The process is more energy-efficient with less spatter. The green laser also improves the reproducibility of the results. Regardless of whether the surface is oxidised, ground, sandblasted, rough or polished to a high gloss, with green laser beams the copper welding seams can always be made at uniform quality. Among the reasons for this is that absorption at
room temperature is independent of the surface properties. The use of shielding gases like argon and nitrogen will result in a welded seam of even higher quality. These shielding gases can be used efficiently and sensibly only when welding with the green laser.
www.uk.trumpf.com
30
LASER SYSTEMS EUROPE ISSUE 29 • WINTER 2015
@lasersystemsmag |
www.lasersystemseurope.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40