search.noResults

search.searching

note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
® Safety Showers & Eyewash products 2000ltr TANK SHOWER SE-VTS-1


For use where a constant water supply or adequate water pressure is unavailable, this tank is fully compliant with ANSI Z358.1 providing a guaranteed 15 minutes of water flow. Supported on a 40mm x 40mm x 3mm hot dip galvanised (provides corrosion protection) carbon steel, square tubular frame with bolt down fixing brackets, the moulded polyethylene 2000ltr (440 Imperial gal) water tank is covered in 40mm reflective Kingspan ThermapitchR TP10 rigid polyurethane foam, insulation board (0.022W/m.k thermal conductivity) and the tank structure is further protected by a shroud complete with warning signage. The heating element sits in a sumped area to ensure it is covered even if the tank is completely emptied during normal use and the unit is fitted with a test activation handle which is accessed from outside the shower area.


CODE SE-VTS-1


DESCRIPTION


2000ltr tank shower - 1590mm x 1480mm x 3930mm H (overall height) - un-laden weight 672kg - filled weight 2,872kg heating 2.25” BSP connection with 230v 3kw rated, wired to a rotary isolation switch - water temperature maintained at approximately 30°C in an ambient of ¯10°C including wind chill - flow rate is 75.7lpm over 15 minute duration - polished stainless steel shower head - all wetted parts are manufactured from non-ferrous materials - activation of shower is via a full width bar across the rear of the unit which also extends beyond the framework for remote & test activation - basic water level indicator fitted to main tank structure


ANSI TIP Delivering tepid water is a crucial but often overlooked component of providing compliant eyewash and drench shower stations. The updated ANSI Z358.1 standard includes a section specifically about the delivery of tepid water. “Tepid water” is defined as “A flushing fluid temperature conducive to promoting a minimum 15 minute irrigation period.


4 www.empteezy.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36