® Safety Showers & Eyewash products PEDESTAL MOUNTED EYEWASH
PMEW A pedestal mounted safety eyewash with ABS plastic bowl with galvanised steel pipe work and brass fittings which are
protected with an anti-corrosive Polyamide 11 high visibility yellow plastic coating which provides good resistance to acids, bases, seawater and oils. The eyewash is fitted with two high flow aerated low pressure outlets fitted with automatic opening dust covers.
This pedestal mounted eyewash has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2 DIN12899.3 ANSI Z358.1
CODE PMEW
DESCRIPTION
Pedestal mounted safety eyewash - ABS plastic bowl & eyewash assembly - push paddle activated - dimensions 80cm x 27cm x 13cm - total weight 6kg
Water inlet: ½” BSP Waste: 1¼” BSP
Eyewash flow rate: 22lpm Eyewash operation: Push paddle Eyewash valve: Full bore ½”
NOTE Water inlet pressure: Recommended 2 bar with a maximum of 8 bar - please notify us prior to ordering if your water pressure is below 1.5 bar
ANSI TIP The storage, transfer and use of flammable liquids require showers and/ or eyewash stations as secondary protection. Look for containers used to handle or store these materials and make sure ANSI Z358.1 compliant emergency equipment is within 10 seconds’ travel distance.
20
www.empteezy.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36